All MIBs › INXNMM-MIB › dot3TxSQETestErrors
dot3TxSQETestErrors
Module: INXNMM-MIB
OID (symbolic): INXNMM-MIB::dot3TxSQETestErrors
OID (numeric): 1.3.6.1.3.3.2.1.4
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: The number of times that the SQE TEST ERROR message has been generated by this interface's PLS sublayer. The PLS sublayer generates an SQE test error message when the Signal-Quality-Error test fails. The Signal-Quality-Error test verifies good data transmission. The INX-NMM does not generate SQE test error messages, so this variable always returns 0.
What is dot3TxSQETestErrors?
Would count Signal-Quality-Error test failures reported by the PLS sublayer after each transmission, but because the INX-NMM's interface never generates SQE test messages, this counter is permanently pinned at 0 and carries no diagnostic value for this device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.3.2.1.4 snmpwalk -v2c -c public <target> INXNMM-MIB::dot3TxSQETestErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.3.2.1.4.1 snmpget -v2c -c public <target> INXNMM-MIB::dot3TxSQETestErrors.1
Start monitoring Interlan (Micom-Interlan) NMM Ethernet management card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INXNMM-MIB::dot3TxSQETestErrors OID value, configure state conditions and alerts, and monitor any Interlan (Micom-Interlan) NMM Ethernet management card from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.3 | dot3 | INXNMM-MIB |
| 1.3.6.1.3.3.2 | dot3TxTable | INXNMM-MIB |
| 1.3.6.1.3.3.2.1 | dot3TxEntry | INXNMM-MIB |
| 1.3.6.1.3.3.2.1.4 | dot3TxSQETestErrors | INXNMM-MIB |