All MIBs › INXNMM-MIB › dot3AlignmentErrors
dot3AlignmentErrors
Module: INXNMM-MIB
OID (symbolic): INXNMM-MIB::dot3AlignmentErrors
OID (numeric): 1.3.6.1.3.3.1.1.5
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: The number of frames received on the interface that are not an integral number of octets in length (i.e., the number of bits they contain is not a multiple of eight) and do not pass the FCS check. This condition indicates that the frames were corrupted during transmission.
What is dot3AlignmentErrors?
Counts frames received whose bit length isn't a multiple of eight and that also fail the FCS check, meaning the frame was corrupted in transit; an admin watches this counter climb as a sign of a bad cable segment or noisy transceiver feeding the INX-NMM's management link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.3.1.1.5 snmpwalk -v2c -c public <target> INXNMM-MIB::dot3AlignmentErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.3.1.1.5.1 snmpget -v2c -c public <target> INXNMM-MIB::dot3AlignmentErrors.1
Start monitoring Interlan (Micom-Interlan) NMM Ethernet management card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INXNMM-MIB::dot3AlignmentErrors OID value, configure state conditions and alerts, and monitor any Interlan (Micom-Interlan) NMM Ethernet management card from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.3 | dot3 | INXNMM-MIB |
| 1.3.6.1.3.3.1 | dot3Table | INXNMM-MIB |
| 1.3.6.1.3.3.1.1 | dot3Entry | INXNMM-MIB |
| 1.3.6.1.3.3.1.1.5 | dot3AlignmentErrors | INXNMM-MIB |