All MIBs › INTERFACETOPN-MIB › interfaceTopNCaps
interfaceTopNCaps
Module: INTERFACETOPN-MIB
OID (symbolic): INTERFACETOPN-MIB::interfaceTopNCaps
OID (numeric): 1.3.6.1.2.1.16.27.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: The type(s) of sorting capabilities supported by the agent.
If the agent can perform sorting of interfaces according to the values of ifInOctets, as defined in [RFC2863], then the 'ifInOctets' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifInUcastPkts, as defined in [RFC2863], then the 'ifInUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifInNUcastPkts, as defined in [RFC2863], then the 'ifInNUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifInDiscards, as defined in [RFC2863], then the 'ifInDiscards' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifInErrors, as defined in [RFC2863], then the 'ifInErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifInUnknownProtocols, as defined in [RFC2863], then the 'ifInUnknownProtocols' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifOutOctets, as defined in [RFC2863], then the 'ifOutOctets' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifOutUcastPackets, as defined in [RFC2863], then the 'ifOutUcastPackets' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifOutNUcastPackets, as defined in [RFC2863], then the 'ifOutNUcastPackets' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifOutDiscards, as defined in [RFC2863], then the 'ifOutDiscards' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifOutErrors, as defined in [RFC2863], then the 'ifOutErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifInMulticastPkts, as defined in [RFC2863], then the 'ifInMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifInBroadcastPkts, as defined in [RFC2863], then the 'ifInBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifOutMulticastPkts, as defined in [RFC2863], then the 'ifOutMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifOutBroadcastPkts, as defined in [RFC2863], then the 'ifOutBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifHCInOctets, as defined in [RFC2863], then the 'ifHCInOctets' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifHCInMulticastPkts, as defined in [RFC2863], then the 'ifHCInMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifHCInBroadcastPkts, as defined in [RFC2863], then the 'ifHCInBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifHCOutOctets, as defined in [RFC2863], then the 'ifHCOutOctets' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifHCOutUcastPkts, as defined in [RFC2863], then the 'ifHCOutUcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifHCOutMulticastPkts, as defined in [RFC2863], then the 'ifHCOutMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the values of ifHCOutBroadcastPkts, as defined in [RFC2863], then the 'ifHCOutBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot3StatsAlignmentErrors, as defined in [RFC2665], then the 'dot3StatsAlignmentErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot3StatsFCSErrors, as defined in [RFC2665], then the 'dot3StatsFCSErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot3StatsSingleCollisionFrames, as defined in [RFC2665],then the 'dot3StatsSingleCollisionFrames' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot3StatsSQETestErrors, as defined in [RFC2665], then the 'dot3StatsSQETestErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot3StatsDeferredTransmissions, as defined in [RFC2665], then the 'dot3StatsDeferredTransmissions' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot3StatsLateCollisions, as defined in [RFC2665], then the 'dot3StatsLateCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot3StatsExcessiveCollisions, as defined in [RFC2665], then the 'dot3StatsExcessiveCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot3StatsInternalMacTxErrors, as defined in [RFC2665],then the 'dot3StatsInternalMacTxErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot3StatsCarrierSenseErrors, as defined in [RFC2665], then the 'dot3StatsCarrierSenseErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot3StatsFrameTooLongs, as defined in [RFC2665], then the 'dot3StatsFrameTooLongs' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot3StatsInternalMacRxErrors, as defined in [RFC2665], then the 'dot3StatsInternalMacRxErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot3StatsSymbolErrors, as defined in [RFC2665], then the 'dot3StatsSymbolErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot3InPauseFrames, as defined in [RFC2665], then the 'dot3InPauseFrames' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot3OutPauseFrames, as defined in [RFC2665], then the 'dot3OutPauseFrames' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsLineErrors, as defined in [RFC1748], then the 'dot5StatsLineErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsBurstErrors, as defined in [RFC1748], then the 'dot5StatsBurstErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsACErrors, as defined in [RFC1748], then the 'dot5StatsACErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsAbortTransErrors, as defined in [RFC1748], then the 'dot5StatsAbortTransErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsInternalErrors, as defined in [RFC1748], then the 'dot5StatsInternalErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsLostFrameErrors, as defined in [RFC1748], then the 'dot5StatsLostFrameErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsReceiveCongestionErrors, as defined in [RFC1748], then the 'dot5StatsReceiveCongestionErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsFrameCopiedErrors, as defined in [RFC1748], then the 'dot5StatsFrameCopiedErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsTokenErrors, as defined in [RFC1748], then the 'dot5StatsTokenErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsSoftErrors, as defined in [RFC1748], then the 'dot5StatsSoftErrors' bit will be set.
If the agent can perform sorting of interfaces according to the
values of dot5StatsHardErrors, as defined in [RFC1748], then the 'dot5StatsHardErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsSignalLoss, as defined in [RFC1748], then the 'dot5StatsSignalLoss' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsTransmitBeacons, as defined in [RFC1748], then the 'dot5StatsTransmitBeacons' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsRecoverys, as defined in [RFC1748], then the 'dot5StatsRecoverys' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsLobeWires, as defined in [RFC1748], then the 'dot5StatsLobeWires' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsRemoves, as defined in [RFC1748], then the 'dot5StatsRemoves' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsSingles, as defined in [RFC1748], then the 'dot5StatsSingles' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot5StatsFreqErrors, as defined in [RFC1748], then the 'dot5StatsFreqErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of etherStatsDropEvents, as defined in [RFC2819], then the 'etherStatsDropEvents' bit will be set.
If the agent can perform sorting of interfaces according to the values of etherStatsOctets, as defined in [RFC2819], then the 'etherStatsOctets' bit will be set.
If the agent can perform sorting of interfaces according to the values of etherStatsPkts, as defined in [RFC2819], then the 'etherStatsPkts' bit will be set.
If the agent can perform sorting of interfaces according to the values of etherStatsBroadcastPkts, as defined in [RFC2819], then the 'etherStatsBroadcastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsMulticastPkts, as defined in [RFC2819], then the 'etherStatsMulticastPkts' bit will be set.
If the agent can perform sorting of interfaces according to the values of etherStatsCRCAlignErrors, as defined in [RFC2819], then the 'etherStatsCRCAlignErrors' bit will be set.
If the agent can perform sorting of interfaces according to the values of etherStatsUndersizePkts, as defined in [RFC2819], then the 'etherStatsUndersizePkts' bit will be set.
If the agent can perform sorting of interfaces according to the values of etherStatsOversizePkts, as defined in [RFC2819], then the 'etherStatsOversizePkts' bit will be set.
If the agent can perform sorting of interfaces according to the values of etherStatsFragments, as defined in [RFC2819], then the 'etherStatsFragments' bit will be set.
If the agent can perform sorting of interfaces according to the values of etherStatsJabbers, as defined in [RFC2819], then the 'etherStatsJabbers' bit will be set.
If the agent can perform sorting of interfaces according to the values of etherStatsCollisions, as defined in [RFC2819], then the 'etherStatsCollisions' bit will be set.
If the agent can perform sorting of interfaces according to the values of etherStatsPkts64Octets, as defined in [RFC2819], then the 'etherStatsPkts64Octets' bit will be set.
If the agent can perform sorting of interfaces according to the values of etherStatsPkts65to127Octets, as defined in [RFC2819], then the 'etherStatsPkts65to127Octets' bit will be set.
If the agent can perform sorting of interfaces according to the values of etherStatsPkts128to255Octets, as defined in [RFC2819], then the 'etherStatsPkts128to255Octets' bit will be set.
If the agent can perform sorting of interfaces according to the values of etherStatsPkts256to511Octets, as defined in [RFC2819], then the 'etherStatsPkts256to511Octets' bit will be set.
If the agent can perform sorting of interfaces according to the values of etherStatsPkts512to1023Octets, as defined in [RFC2819], then the 'etherStatsPkts512to1023Octets' bit will be set.
If the agent can perform sorting of interfaces according to the
values of etherStatsPkts1024to1518Octets, as defined in [RFC2819], then the 'etherStatsPkts1024to1518Octets' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot1dTpPortInFrames, as defined in [RFC1493], then the 'dot1dTpPortInFrames' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot1dTpPortOutFrames, as defined in [RFC1493], then the 'dot1dTpPortOutFrames' bit will be set.
If the agent can perform sorting of interfaces according to the values of dot1dTpPortInDiscards, as defined in [RFC1493], then the 'dot1dTpPortInDiscards' bit will be set.
What is interfaceTopNCaps?
This read-only BITS object reports which interface statistics the agent is capable of sorting on for Top N reports, such as ifInOctets, ifOutErrors, or RMON etherStats counters, with each bit corresponding to one supported sortable variable. Admins check this before configuring a Top N control entry to confirm the agent actually supports sorting by the counter they want to rank interfaces on. For example, if the ifHCInOctets bit is not set in this value, an admin would know the agent can't produce a Top N report ranked by high-capacity input octet counts on that device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.16.27.1.1 snmpwalk -v2c -c public <target> INTERFACETOPN-MIB::interfaceTopNCaps
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.16.27.1.1.1 snmpget -v2c -c public <target> INTERFACETOPN-MIB::interfaceTopNCaps.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> interfaceTopNCaps.1
Start monitoring Vendor-neutral IETF RMON/SMON standard (Top-N interface reporting on probes/switches) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACETOPN-MIB::interfaceTopNCaps OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF RMON/SMON standard (Top-N interface reporting on probes/switches) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.16 | rmon | ITOUCHHUB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.16.27 | interfaceTopNMIB | INTERFACETOPN-MIB |
| 1.3.6.1.2.1.16.27.1 | interfaceTopNObjects | INTERFACETOPN-MIB |
| 1.3.6.1.2.1.16.27.1.1 | interfaceTopNCaps | INTERFACETOPN-MIB |