All MIBs › INNOVX-DTE-MIB › dtePortFrameCounts
dtePortFrameCounts
Module: INNOVX-DTE-MIB
OID (symbolic): INNOVX-DTE-MIB::dtePortFrameCounts
OID (numeric): 1.3.6.1.4.1.498.22.1.6.5.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The total number of frames transmitted and received on each interface port. This object will be reset to zero after a read, and after power up, soft reset, or factory defaults reset.
Octet 1 - DTE Interface Transmit Frame Count Octet 2 bit 7 - 2^15 bit 7 - 2^7 bit 6 - 2^14 bit 6 - 2^6 bit 5 - 2^13 bit 5 - 2^5 bit 4 - 2^12 bit 4 - 2^4 bit 3 - 2^11 bit 3 - 2^3 bit 2 - 2^10 bit 2 - 2^2 bit 1 - 2^9 bit 1 - 2^1 bit 0 - 2^8 bit 0 - 2^0
Octet 3 - DTE Interface Receive Frame Count Octet 4 bit 7 - 2^15 bit 7 - 2^7 bit 6 - 2^14 bit 6 - 2^6 bit 5 - 2^13 bit 5 - 2^5 bit 4 - 2^12 bit 4 - 2^4 bit 3 - 2^11 bit 3 - 2^3 bit 2 - 2^10 bit 2 - 2^2 bit 1 - 2^9 bit 1 - 2^1 bit 0 - 2^8 bit 0 - 2^0
What is dtePortFrameCounts?
This read-only 4-byte value packs the total number of frames transmitted (octets 1-2) and received (octets 3-4) on this DTE interface port as two 16-bit big-endian counters; the object resets to zero after being read, and also after power-up, soft reset, or a factory-defaults reset. Admins poll it to get a running frame count for the port, keeping in mind that reading it clears the counters, so repeated polls give incremental counts rather than a persistent cumulative total. For example, an admin polling this object every minute would use each read's value as that minute's frame count, since the counters zero out immediately after being retrieved.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.22.1.6.5.3 snmpwalk -v2c -c public <target> INNOVX-DTE-MIB::dtePortFrameCounts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.22.1.6.5.3.1 snmpget -v2c -c public <target> INNOVX-DTE-MIB::dtePortFrameCounts.1
Start monitoring InnoVX WAN access device / serial DTE-DCE equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INNOVX-DTE-MIB::dtePortFrameCounts OID value, configure state conditions and alerts, and monitor any InnoVX WAN access device / serial DTE-DCE equipment from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| 1.3.6.1.4.1.498.22 | framerelay | INNOVX-CORE-MIB |
| 1.3.6.1.4.1.498.22.1 | innovx | INNOVX-CORE-MIB |
| 1.3.6.1.4.1.498.22.1.6 | dteGroup | INNOVX-CORE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.22.1.6.5 | dteStatus | INNOVX-DTE-MIB |
| 1.3.6.1.4.1.498.22.1.6.5.3 | dtePortFrameCounts | INNOVX-DTE-MIB |