All MIBs › INNOVX-DTE-MIB › dteLoopback
dteLoopback
Module: INNOVX-DTE-MIB
OID (symbolic): INNOVX-DTE-MIB::dteLoopback
OID (numeric): 1.3.6.1.4.1.498.22.1.6.4.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Control the DTE loopback to the channel. noTest(1) stops the test. toChan(2) starts a loopback toward the DTE.
What is dteLoopback?
This read-write value controls a DTE loopback test toward the channel: noTest(1) stops any active loopback, while toChan(2) starts a loopback test directed toward the DTE. Admins use it to isolate whether a suspected fault lies on the DTE side of the connection by looping traffic back at this point and checking for errors. For example, an admin troubleshooting data corruption would set this to toChan(2) to run a loopback test toward the DTE, then set it back to noTest(1) once done testing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.22.1.6.4.1 snmpwalk -v2c -c public <target> INNOVX-DTE-MIB::dteLoopback
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.22.1.6.4.1.1 snmpget -v2c -c public <target> INNOVX-DTE-MIB::dteLoopback.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.22.1.6.4.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dteLoopback.1
Start monitoring InnoVX WAN access device / serial DTE-DCE equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INNOVX-DTE-MIB::dteLoopback OID value, configure state conditions and alerts, and monitor any InnoVX WAN access device / serial DTE-DCE equipment from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| 1.3.6.1.4.1.498.22 | framerelay | INNOVX-CORE-MIB |
| 1.3.6.1.4.1.498.22.1 | innovx | INNOVX-CORE-MIB |
| 1.3.6.1.4.1.498.22.1.6 | dteGroup | INNOVX-CORE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.22.1.6.4 | dteDiagnostics | INNOVX-DTE-MIB |
| 1.3.6.1.4.1.498.22.1.6.4.1 | dteLoopback | INNOVX-DTE-MIB |