INNOVX-DTE-MIB :: dteLedStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › INNOVX-DTE-MIB › dteLedStatus

dteLedStatus

Module: INNOVX-DTE-MIB

OID (symbolic): INNOVX-DTE-MIB::dteLedStatus

OID (numeric): 1.3.6.1.4.1.498.22.1.6.5.1

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: A bitwise snapshot of the front panel LED states, where 0 = LED off and 1 = LED on, as follows:

LED description

Octet 1 bit 7 - n/u bit 6 - n/u bit 5 - n/u bit 4 - n/u bit 3 - n/u bit 2 - DTE LMI LMI traffic on DTE bit 1 - SD EQP send data - equipment traffic bit 0 - RD EQP receive data - equipment traffic

What is dteLedStatus?

This read-only single-byte bitmask reports the current on/off state of this DTE port's front-panel LEDs: bit 2 indicates DTE LMI traffic, bit 1 indicates send-data equipment traffic (SD EQP), and bit 0 indicates receive-data equipment traffic (RD EQP), with the remaining bits unused. Admins use it to remotely check the same activity indicators a technician would see by looking at the device's front panel, without needing to be physically present. For example, seeing only bit 0 (RD EQP) set but not bit 1 (SD EQP) would tell a remote admin the port is receiving data but not transmitting, matching a one-way traffic problem.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.22.1.6.5.1
snmpwalk -v2c -c public <target> INNOVX-DTE-MIB::dteLedStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.498.22.1.6.5.1.1
snmpget -v2c -c public <target> INNOVX-DTE-MIB::dteLedStatus.1

Start monitoring InnoVX WAN access device / serial DTE-DCE equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INNOVX-DTE-MIB::dteLedStatus OID value, configure state conditions and alerts, and monitor any InnoVX WAN access device / serial DTE-DCE equipment from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.498gdcDMA200-MIB
1.3.6.1.4.1.498.22framerelayINNOVX-CORE-MIB
1.3.6.1.4.1.498.22.1innovxINNOVX-CORE-MIB
1.3.6.1.4.1.498.22.1.6dteGroupINNOVX-CORE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.498.22.1.6.5dteStatusINNOVX-DTE-MIB
1.3.6.1.4.1.498.22.1.6.5.1dteLedStatusINNOVX-DTE-MIB