All MIBs › IMA-MIB › imaLinkFeTxState
imaLinkFeTxState
Module: IMA-MIB
OID (symbolic): IMA-MIB::imaLinkFeTxState
OID (numeric): 1.3.6.1.4.1.353.5.7.1.1.4.1.6
Node type: OBJECT-TYPE
Type: ImaLinkState
Access: read-only
Description:
The current state of the far-end transmit link as reported via ICP cells.
What is imaLinkFeTxState?
This object reports the current transmission state of the far-end (remote) link as measured by ICP (IMA Control Protocol) cells in an Inverse Multiplexing over ATM (IMA) system. It reveals whether the far-end device is ready to transmit, experiencing issues, or is unavailable. An operator monitors this state during IMA link bring-up or troubleshooting to verify that both ends are synchronized and healthy.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.353.5.7.1.1.4.1.6 snmpwalk -v2c -c public <target> IMA-MIB::imaLinkFeTxState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.353.5.7.1.1.4.1.6.1 snmpget -v2c -c public <target> IMA-MIB::imaLinkFeTxState.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.353 | atmForum | ATM-FORUM-SNMP-M4-MIB |
| 1.3.6.1.4.1.353.5 | atmForumNetworkManagement | ATM-FORUM-SNMP-M4-MIB |
| 1.3.6.1.4.1.353.5.7 | atmfIma | IMA-MIB |
| 1.3.6.1.4.1.353.5.7.1 | atmfImaMib | IMA-MIB |
| 1.3.6.1.4.1.353.5.7.1.1 | atmfImaMibObjects | IMA-MIB |
| 1.3.6.1.4.1.353.5.7.1.1.4 | imaLinkTable | IMA-MIB |
| 1.3.6.1.4.1.353.5.7.1.1.4.1 | imaLinkEntry | IMA-MIB |
| 1.3.6.1.4.1.353.5.7.1.1.4.1.6 | imaLinkFeTxState | IMA-MIB |