All MIBs › IEEE8023-LAG-MIB › dot3adAggTimeOfLastOperChange
dot3adAggTimeOfLastOperChange
Module: IEEE8023-LAG-MIB
OID (symbolic): IEEE8023-LAG-MIB::dot3adAggTimeOfLastOperChange
OID (numeric): 1.2.840.10006.300.43.1.1.3.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description:
The time at which the interface entered its current operational state, in terms of centiseconds since the system was last reset. If the current state was entered prior to the last reinitialization of the local network management subsystem, then this object contains a value of zero. The ifLastChange object in the Interfaces MIB defined in IETF RFC 2863 is a suitable object for supplying a value for aAggTimeOfLastOperChange. This value is read-only. Note - aAggTimeOfLastOperChange was defined in terms of the aTimeSinceSystemReset variable of IEEE Std 802.3-2008, F.2.1, in earlier versions of this standard. aTimeSinceSystemReset and ifLastChange have the same meaning.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.2.840.10006.300.43.1.1.3.1.5 snmpwalk -v2c -c public <target> IEEE8023-LAG-MIB::dot3adAggTimeOfLastOperChange
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.2.840.10006.300.43.1.1.3.1.5.1 snmpget -v2c -c public <target> IEEE8023-LAG-MIB::dot3adAggTimeOfLastOperChange.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.2 | member_body | IEEE802dot11-MIB |
| 1.2.840 | us | IEEE802dot11-MIB |
| 1.2.840.10006 | ieee802dot3 | START-MIB |
| 1.2.840.10006.300 | snmpmibs | START-MIB |
| 1.2.840.10006.300.43 | lagMIB | IEEE8023-LAG-MIB |
| 1.2.840.10006.300.43.1 | lagMIBObjects | IEEE8023-LAG-MIB |
| 1.2.840.10006.300.43.1.1 | dot3adAgg | IEEE8023-LAG-MIB |
| 1.2.840.10006.300.43.1.1.3 | dot3adAggXTable | IEEE8023-LAG-MIB |
| 1.2.840.10006.300.43.1.1.3.1 | dot3adAggXEntry | IEEE8023-LAG-MIB |
| 1.2.840.10006.300.43.1.1.3.1.5 | dot3adAggTimeOfLastOperChange | IEEE8023-LAG-MIB |