All MIBs › IEEE8023-LAG-MIB › dot3adAggPortWTRTime
dot3adAggPortWTRTime
Module: IEEE8023-LAG-MIB
OID (symbolic): IEEE8023-LAG-MIB::dot3adAggPortWTRTime
OID (numeric): 1.2.840.10006.300.43.1.2.5.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The wait-to-restore (WTR) period accompanying selection rules set by aAggConversationAdminLink[] in a command issued by a network administrator. It may be configured in steps of 1 min between 5 min and 12 min, while two additional special values are also used. The value 0 indicates revertive and is the default value. The value 100 indicates non-revertive mode of operation, and the WTR_timer will be kept to the value 100.
What is dot3adAggPortWTRTime?
Sets the wait-to-restore period, in minutes, applied after a link-selection change before reverting to a previously preferred link; 0 means revertive (immediate) behavior (the default) and 100 means fully non-revertive.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.2.840.10006.300.43.1.2.5.1.5 snmpwalk -v2c -c public <target> IEEE8023-LAG-MIB::dot3adAggPortWTRTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.2.840.10006.300.43.1.2.5.1.5.1 snmpget -v2c -c public <target> IEEE8023-LAG-MIB::dot3adAggPortWTRTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.2.840.10006.300.43.1.2.5.1.5.1 i <value>
Start monitoring Vendor-neutral IEEE 802.3ad/802.1AX standard (switches/routers supporting LACP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE8023-LAG-MIB::dot3adAggPortWTRTime OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.3ad/802.1AX standard (switches/routers supporting LACP) from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.2 | member_body | IEEE802dot11-MIB |
| 1.2.840 | us | IEEE802dot11-MIB |
| 1.2.840.10006 | ieee802dot3 | START-MIB |
| 1.2.840.10006.300 | snmpmibs | START-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.2.840.10006.300.43 | lagMIB | IEEE8023-LAG-MIB |
| 1.2.840.10006.300.43.1 | lagMIBObjects | IEEE8023-LAG-MIB |
| 1.2.840.10006.300.43.1.2 | dot3adAggPort | IEEE8023-LAG-MIB |
| 1.2.840.10006.300.43.1.2.5 | dot3adAggPortSecondXTable | IEEE8023-LAG-MIB |
| 1.2.840.10006.300.43.1.2.5.1 | dot3adAggPortSecondXEntry | IEEE8023-LAG-MIB |
| 1.2.840.10006.300.43.1.2.5.1.5 | dot3adAggPortWTRTime | IEEE8023-LAG-MIB |