All MIBs › IEEE8023-LAG-MIB › dot3adAggPortLinkNumberId
dot3adAggPortLinkNumberId
Module: IEEE8023-LAG-MIB
OID (symbolic): IEEE8023-LAG-MIB::dot3adAggPortLinkNumberId
OID (numeric): 1.2.840.10006.300.43.1.2.5.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The Link Number ID value configured for this Aggregation Port by the System's administrator. When the Link Number ID value matches one of the non zero values in the selection prioritized lists in aAggConversationAdminLink[] (7.3.1.1.35), then this Aggregation Port must be configured to have an aAggPortActorAdminKey value that matches the aAggActorAdminKey of the Aggregator used by the LAG of the links specified in aAggConversationAdminLink[]. Its default value is set to aAggPortActorPort (7.3.2.1.14). NOTE - In the case of DRNI, the match of the aAggActorAdminKey to aAggPortActorAdminKey values excludes the first two bits identifying the individual Portal System in the Portal. If the network administrator fails to configure the proper values for the aAggPortActorAdminKey variables in all of the Aggregators Ports attached to a Portal, the DRCP (9.4) and the variable Port_Oper_Conversation_Mask (6.6.2.2) prevent looping and/or duplicate delivery, if necessary, by discarding frames belonging to misconfigured Conversations.
What is dot3adAggPortLinkNumberId?
Sets the Link Number ID administratively assigned to this Aggregation Port, used to match it against entries in the Conversation-Admin-Link table when an administrator manually pins Port Conversation IDs to specific links; it defaults to the port's own Actor Port number.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.2.840.10006.300.43.1.2.5.1.3 snmpwalk -v2c -c public <target> IEEE8023-LAG-MIB::dot3adAggPortLinkNumberId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.2.840.10006.300.43.1.2.5.1.3.1 snmpget -v2c -c public <target> IEEE8023-LAG-MIB::dot3adAggPortLinkNumberId.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.2.840.10006.300.43.1.2.5.1.3.1 i <value>
Start monitoring Vendor-neutral IEEE 802.3ad/802.1AX standard (switches/routers supporting LACP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE8023-LAG-MIB::dot3adAggPortLinkNumberId OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.3ad/802.1AX standard (switches/routers supporting LACP) from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.2 | member_body | IEEE802dot11-MIB |
| 1.2.840 | us | IEEE802dot11-MIB |
| 1.2.840.10006 | ieee802dot3 | START-MIB |
| 1.2.840.10006.300 | snmpmibs | START-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.2.840.10006.300.43 | lagMIB | IEEE8023-LAG-MIB |
| 1.2.840.10006.300.43.1 | lagMIBObjects | IEEE8023-LAG-MIB |
| 1.2.840.10006.300.43.1.2 | dot3adAggPort | IEEE8023-LAG-MIB |
| 1.2.840.10006.300.43.1.2.5 | dot3adAggPortSecondXTable | IEEE8023-LAG-MIB |
| 1.2.840.10006.300.43.1.2.5.1 | dot3adAggPortSecondXEntry | IEEE8023-LAG-MIB |
| 1.2.840.10006.300.43.1.2.5.1.3 | dot3adAggPortLinkNumberId | IEEE8023-LAG-MIB |