All MIBs › IEEE8021-AS-MIB › ieee8021AsDefaultDSTimeSource
ieee8021AsDefaultDSTimeSource
Module: IEEE8021-AS-MIB
OID (symbolic): IEEE8021-AS-MIB::ieee8021AsDefaultDSTimeSource
OID (numeric): 1.3.111.2.802.1.1.20.1.1.15
Node type: OBJECT-TYPE
Type: IEEE8021ASTimeSourceValue
Access: read-only
Description: The timeSource is an information-only attribute indicating the type of source of time used by a ClockMaster. The value is not used in the selection of the grandmaster. The values shall be as specified in Table 8-3. These represent categories. For example, the GPS entry would include not only the GPS system of the U.S. Department of Defense but the European Galileo system and other present and future satellite-based timing systems. All unused values in Table 8-3 are reserved.
The initialization value is selected as follows: a) If the timeSource (8.6.2.7 and Table 8-3), is known at the time of initialization, the value is derived from the table, else b) The value is set to INTERNAL_OSCILLATOR (160).
What is ieee8021AsDefaultDSTimeSource?
Identifies the category of time source feeding this clock, e.g. GPS, NTP, atomic clock, or internal oscillator (the default). Informational only; useful for confirming a device is actually locked to an external reference rather than free-running on its own oscillator.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.111.2.802.1.1.20.1.1.15 snmpwalk -v2c -c public <target> IEEE8021-AS-MIB::ieee8021AsDefaultDSTimeSource
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.111.2.802.1.1.20.1.1.15.1 snmpget -v2c -c public <target> IEEE8021-AS-MIB::ieee8021AsDefaultDSTimeSource.1
Start monitoring Vendor-neutral IEEE 802.1AS standard (gPTP-capable bridge/switch/end station) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE8021-AS-MIB::ieee8021AsDefaultDSTimeSource OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.1AS standard (gPTP-capable bridge/switch/end station) from a single console.
OID Breakdown
Upper-level ancestors (3 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.111.2.802.1.1 | ieee802dot1mibs | IEEE8021-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.111.2.802.1.1.20 | ieee8021AsTimeSyncMib | IEEE8021-AS-MIB |
| 1.3.111.2.802.1.1.20.1 | ieee8021AsMIBObjects | IEEE8021-AS-MIB |
| 1.3.111.2.802.1.1.20.1.1 | ieee8021AsDefaultDS | IEEE8021-AS-MIB |
| 1.3.111.2.802.1.1.20.1.1.15 | ieee8021AsDefaultDSTimeSource | IEEE8021-AS-MIB |