All MIBs › IBOOTPDU-MIB › setFactoryDefaults
setFactoryDefaults
Module: IBOOTPDU-MIB
OID (symbolic): IBOOTPDU-MIB::setFactoryDefaults
OID (numeric): 1.3.6.1.4.1.1418.6.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: true(1) false(0)
What is setFactoryDefaults?
setFactoryDefaults, when set to true(1), resets this PDU back to its factory-default configuration; because it requires a reboot to take effect, an admin should treat setting it as a deliberate, disruptive action.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1418.6.1.18 snmpwalk -v2c -c public <target> IBOOTPDU-MIB::setFactoryDefaults
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1418.6.1.18.1 snmpget -v2c -c public <target> IBOOTPDU-MIB::setFactoryDefaults.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1418.6.1.18.1 i <value>
Start monitoring Dataprobe iBoot-PDU remote power-switching unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBOOTPDU-MIB::setFactoryDefaults OID value, configure state conditions and alerts, and monitor any Dataprobe iBoot-PDU remote power-switching unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1418 | dataprobe | IBOOTPDU-MIB |
| 1.3.6.1.4.1.1418.6 | iBoot_PDU_Agent | IBOOTPDU-MIB |
| 1.3.6.1.4.1.1418.6.1 | device | IBOOTPDU-MIB |
| 1.3.6.1.4.1.1418.6.1.18 | setFactoryDefaults | IBOOTPDU-MIB |