All MIBs › IBOOTPDU-MIB › outletControl
outletControl
Module: IBOOTPDU-MIB
OID (symbolic): IBOOTPDU-MIB::outletControl
OID (numeric): 1.3.6.1.4.1.1418.6.5.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Use this a a write only variable. It is used to change the outlets status
What is outletControl?
outletControl is the write-only control used to change an outlet's state, accepting off(0), on(1), or cycle(2) to power off, power on, or power-cycle the outlet remotely.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1418.6.5.1.5 snmpwalk -v2c -c public <target> IBOOTPDU-MIB::outletControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1418.6.5.1.5.1 snmpget -v2c -c public <target> IBOOTPDU-MIB::outletControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1418.6.5.1.5.1 i <value>
Start monitoring Dataprobe iBoot-PDU remote power-switching unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBOOTPDU-MIB::outletControl OID value, configure state conditions and alerts, and monitor any Dataprobe iBoot-PDU remote power-switching unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1418 | dataprobe | IBOOTPDU-MIB |
| 1.3.6.1.4.1.1418.6 | iBoot_PDU_Agent | IBOOTPDU-MIB |
| 1.3.6.1.4.1.1418.6.5 | outletTable | IBOOTPDU-MIB |
| 1.3.6.1.4.1.1418.6.5.1 | outletEntry | IBOOTPDU-MIB |
| 1.3.6.1.4.1.1418.6.5.1.5 | outletControl | IBOOTPDU-MIB |