IBM-LES-LECS-MIB :: configDirectScr

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › IBM-LES-LECS-MIB › configDirectScr

configDirectScr

Module: IBM-LES-LECS-MIB

OID (symbolic): IBM-LES-LECS-MIB::configDirectScr

OID (numeric): 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.10

Node type: OBJECT-TYPE

Type: Bandwidth

Access: read-write

Description: Specifies the Sustained Cell Rate (SCR) Traffic Parameter for the Configuration Direct VCC to the LECS. The specified rate is used for both forward and backward directions. If the SCR equals the PCR specified in LECS-INTF-7, the call is signalled with PCR only. If SCR is signalled, the Maximum Burst Size traffic parameter is set to accomodate the maximum control frame size of 1516 bytes.

What is configDirectScr?

This value sets the Sustained Cell Rate (SCR) traffic parameter, applied in both directions, for the Configuration Direct VCC to the LECS; if SCR equals the configured PCR the call signals PCR only, and when SCR is signaled the Maximum Burst Size is set to accommodate a 1516-byte control frame. Admins adjust it to shape the sustained bandwidth reserved for LECS signaling traffic distinct from its peak burst rate. Setting SCR lower than PCR would make the connection request a variable bit rate service instead of a constant-rate one.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.10
snmpwalk -v2c -c public <target> IBM-LES-LECS-MIB::configDirectScr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.10.1
snmpget -v2c -c public <target> IBM-LES-LECS-MIB::configDirectScr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.10.1 s <value>

Start monitoring IBM ATM switch/router with LAN Emulation Configuration Server (LECS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBM-LES-LECS-MIB::configDirectScr OID value, configure state conditions and alerts, and monitor any IBM ATM switch/router with LAN Emulation Configuration Server (LECS) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2ibmATM-ADAPTER-MIB
1.3.6.1.4.1.2.6ibmProdATM-ADAPTER-MIB
1.3.6.1.4.1.2.6.118nwaysMSSFECLIENT827x-MIB
1.3.6.1.4.1.2.6.118.1mssCommonNWAYSMSS-MIB
1.3.6.1.4.1.2.6.118.1.2mssCmnSrvrsNWAYSMSS-MIB
1.3.6.1.4.1.2.6.118.1.2.1mssServerLanENWAYSMSS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2.6.118.1.2.1.2ibmLesLecsMIBIBM-LES-LECS-MIB
1.3.6.1.4.1.2.6.118.1.2.1.2.1ibmLesLecsConfGroupIBM-LES-LECS-MIB
1.3.6.1.4.1.2.6.118.1.2.1.2.1.1lesLecsConfTableIBM-LES-LECS-MIB
1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1lesLecsConfEntryIBM-LES-LECS-MIB
1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.10configDirectScrIBM-LES-LECS-MIB