All MIBs › IBM-LES-LECS-MIB › configDirectPcr
configDirectPcr
Module: IBM-LES-LECS-MIB
OID (symbolic): IBM-LES-LECS-MIB::configDirectPcr
OID (numeric): 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.9
Node type: OBJECT-TYPE
Type: Bandwidth
Access: read-write
Description: Specifies the Peak Cell Rate (PCR) Traffic Parameter for the Configuration Direct VCC to the LECS. The specified rate is used for both forward and backward directions. When a best effort connection is rejected due to the PCR, the call may be automatically retried with a lower PCR. Retries are performed under the following conditions: if (rejected PCR > 100 Mbps) retry with PCR = 100 Mbps else if (25 < rejected PCR <= 100 Mbps) retry with PCR = 25 Mbps
What is configDirectPcr?
This value sets the Peak Cell Rate (PCR) traffic parameter, applied in both directions, for the Configuration Direct VCC connecting to the LECS, and the device automatically retries with a lower PCR (100 Mbps, then 25 Mbps) if a best-effort connection at the configured PCR is rejected. Admins tune this to control how aggressively the device requests bandwidth for LECS signaling versus how likely the call is to succeed on a congested ATM fabric. Setting an overly high PCR could trigger automatic retries at lower, standard fallback rates until the call is accepted.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.9 snmpwalk -v2c -c public <target> IBM-LES-LECS-MIB::configDirectPcr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.9.1 snmpget -v2c -c public <target> IBM-LES-LECS-MIB::configDirectPcr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.9.1 s <value>
Start monitoring IBM ATM switch/router with LAN Emulation Configuration Server (LECS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBM-LES-LECS-MIB::configDirectPcr OID value, configure state conditions and alerts, and monitor any IBM ATM switch/router with LAN Emulation Configuration Server (LECS) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6.118 | nwaysMSS | FECLIENT827x-MIB |
| 1.3.6.1.4.1.2.6.118.1 | mssCommon | NWAYSMSS-MIB |
| 1.3.6.1.4.1.2.6.118.1.2 | mssCmnSrvrs | NWAYSMSS-MIB |
| 1.3.6.1.4.1.2.6.118.1.2.1 | mssServerLanE | NWAYSMSS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.118.1.2.1.2 | ibmLesLecsMIB | IBM-LES-LECS-MIB |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1 | ibmLesLecsConfGroup | IBM-LES-LECS-MIB |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1 | lesLecsConfTable | IBM-LES-LECS-MIB |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1 | lesLecsConfEntry | IBM-LES-LECS-MIB |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.9 | configDirectPcr | IBM-LES-LECS-MIB |