All MIBs › IBM-FEATURE-ACTIVATION-MIB › ibmFodStatus
ibmFodStatus
Module: IBM-FEATURE-ACTIVATION-MIB
OID (symbolic): IBM-FEATURE-ACTIVATION-MIB::ibmFodStatus
OID (numeric): 1.3.6.1.4.1.2.5.31.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Return status of the last firmware activation method initiated through SNMP method. Valid return codes are: Code Action(s) Meaning 1 1,2,3,4 Success 2 1,2 Reboot Required 3 1 Firmware Version/Update Issue 4 1 Key Corrupt 5 1 Key Not Valid for Device 6 1,2,4 Key File Not Found 7 1,3,4 Failure to Communicate with File Server 8 1 Key Storage Full 9 3,4 TFTP/SFTP Server Storage Full 10 1,3,4 SFTP User/Password Authentication Failed 11 2,3 Invalid Index 12 1,3,4 Protocol Specified in URI Not Supported 13 1,2 Pre-Requisite Key Action Required 14 1,2,3,4 Action Still In Process/Busy 15 3,4 File Already Exists on Server 16 3,4 Permission Problem with Specified URI User
What is ibmFodStatus?
This read-only object reports the result of the most recently completed SNMP-initiated feature activation action, using codes such as success(1), rebootRequired(2), corruptKeyFile(4), or communicationFailure(7). An admin polls this after issuing an ibmFodAction to confirm whether the install, uninstall, export, or inventory operation actually succeeded and, if not, why. A returned value of keyFileNotPresent(6) would tell the admin the specified file URI did not contain a usable key file.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.5.31.1.4 snmpwalk -v2c -c public <target> IBM-FEATURE-ACTIVATION-MIB::ibmFodStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.5.31.1.4.1 snmpget -v2c -c public <target> IBM-FEATURE-ACTIVATION-MIB::ibmFodStatus.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ibmFodStatus.1
Start monitoring IBM network and server hardware with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBM-FEATURE-ACTIVATION-MIB::ibmFodStatus OID value, configure state conditions and alerts, and monitor any IBM network and server hardware from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.5 | ibmArchitecture | IBM-FEATURE-ACTIVATION-MIB |
| 1.3.6.1.4.1.2.5.31 | ibmFeatureActivationMIB | IBM-FEATURE-ACTIVATION-MIB |
| 1.3.6.1.4.1.2.5.31.1 | ibmFodObjects | IBM-FEATURE-ACTIVATION-MIB |
| 1.3.6.1.4.1.2.5.31.1.4 | ibmFodStatus | IBM-FEATURE-ACTIVATION-MIB |