All MIBs › HUAWEI-XDSL-COMMON-MIB › hwXdslAttndrMethod
hwXdslAttndrMethod
Module: HUAWEI-XDSL-COMMON-MIB
OID (symbolic): HUAWEI-XDSL-COMMON-MIB::hwXdslAttndrMethod
OID (numeric): 1.3.6.1.4.1.2011.6.148.1.4.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This parameter specifies the method to be used for the calculation of the ATTNDR in the downstream and upstream direction. The parameter can take three values 0, 1 and 2. Options: 1. attndrMethod0(0) - The basic Attainable Net Data Rate method 2. attndrMethod1(1) - The improved Attainable Net Data Rate method, If the control parameter attndr_method is set to a value of 1, the VTU-O and VTU-R shall use the impulse noise protection limit INP_min0 with value as indicated in O-TPS. If O-TPS configures for dual bearer channel mode, then the highest INP_MINn over the bearer channels shall be used 1 3. attndrMethod2(2) - The improved Attainable Net Data Rate method, If the control parameter attndr_method is set to a value of 2, the VTU-O and VTU-R shall use an impulse noise protection limit INP_MIN0 = 0
What is hwXdslAttndrMethod?
Selects which of three vendor-defined calculation methods (attndrMethod0/1/2) this xDSL line uses to compute ATTNDR (Attainable Net Data Rate) in both directions — different methods may better match specific line conditions or chipsets.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.148.1.4.1 snmpwalk -v2c -c public <target> HUAWEI-XDSL-COMMON-MIB::hwXdslAttndrMethod
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.148.1.4.1.1 snmpget -v2c -c public <target> HUAWEI-XDSL-COMMON-MIB::hwXdslAttndrMethod.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.6.148.1.4.1.1 i <value>
Start monitoring Huawei DSLAM / broadband access node (MSAN, shared xDSL conventions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-XDSL-COMMON-MIB::hwXdslAttndrMethod OID value, configure state conditions and alerts, and monitor any Huawei DSLAM / broadband access node (MSAN, shared xDSL conventions) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.148 | hwXdslCommon | HUAWEI-XDSL-COMMON-MIB |
| 1.3.6.1.4.1.2011.6.148.1 | hwXdslCommonMib | HUAWEI-XDSL-COMMON-MIB |
| 1.3.6.1.4.1.2011.6.148.1.4 | hwXdslAttndrConfig | HUAWEI-XDSL-COMMON-MIB |
| 1.3.6.1.4.1.2011.6.148.1.4.1 | hwXdslAttndrMethod | HUAWEI-XDSL-COMMON-MIB |