HUAWEI-VOP-MIB :: hwVOPSNRMarginConfProfRaDsNrmDs

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HUAWEI-VOP-MIB › hwVOPSNRMarginConfProfRaDsNrmDs

hwVOPSNRMarginConfProfRaDsNrmDs

Module: HUAWEI-VOP-MIB

OID (symbolic): HUAWEI-VOP-MIB::hwVOPSNRMarginConfProfRaDsNrmDs

OID (numeric): 1.3.6.1.4.1.2011.6.144.1.1.14.1.16

Node type: OBJECT-TYPE

Type: Gauge32

Access: read-create

Description: The Downstream Down-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa. If the downstream noise margin is below this value, and stays below it for more than the time specified by the hwVOPSNRMarginConfProfDsTimeDs, the xTU-R shall attempt to increase the downstream net data rate. The Downstream Down-Shift Noise Margin ranges from 0 to 310 units of 0.1 dB (Physical values are 0 to 31 dB). Unit: 0.1 dB.

What is hwVOPSNRMarginConfProfRaDsNrmDs?

Downstream Down-Shift Noise Margin, in 0.1 dB steps from 0 to 31.0 dB (default 1.0 dB), used only when hwVOPSNRMarginConfProfRaModeDs is dynamicRa: once the downstream margin stays below this value for longer than hwVOPSNRMarginConfProfDsTimeDs, the xTU-R attempts to lower the downstream net data rate to recover margin (RA-DSNRMds, G.997.1 7.3.1.4.7).

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiEXPERTV2-MIB
1.3.6.1.4.1.2011.6huaweiUtilityHUAWEI-3COM-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.6.144hwVOPGlobalModuleHUAWEI-VOP-MIB
1.3.6.1.4.1.2011.6.144.1hwVOPObjectsHUAWEI-VOP-MIB
1.3.6.1.4.1.2011.6.144.1.1hwVOPProfilesHUAWEI-VOP-MIB
1.3.6.1.4.1.2011.6.144.1.1.14hwVOPSNRMarginConfProfTableHUAWEI-VOP-MIB
1.3.6.1.4.1.2011.6.144.1.1.14.1hwVOPSNRMarginConfProfEntryHUAWEI-VOP-MIB
1.3.6.1.4.1.2011.6.144.1.1.14.1.16hwVOPSNRMarginConfProfRaDsNrmDsHUAWEI-VOP-MIB

Module

This MIB depends on