All MIBs › HUAWEI-VOP-MIB › hwVOPGlobalAttachmentMethodConfigured
hwVOPGlobalAttachmentMethodConfigured
Module: HUAWEI-VOP-MIB
OID (symbolic): HUAWEI-VOP-MIB::hwVOPGlobalAttachmentMethodConfigured
OID (numeric): 1.3.6.1.4.1.2011.6.144.1.2.1.2
Node type: OBJECT-TYPE
Type: HWVOPAttachmentMethods
Access: read-write
Description: This object configures the VoP attachment-method to be used by this Network Element. Two attachment methods, 'direct' and 'indirect' are available and only one method can be selected at any time. To select a specific attachment-method the management system SHOULD set the respective bit-position to '1'. Changing the requested attachment-method may implies a system reboot.
The value of this object MUST be maintained in a persistent manner.
In case the selected attachment-method is not supported by the network element or if the management system tries to configure both methods simultaneously the SNMP SET operation SHOULD be rejected by the network element. Default value is 1(direct).
What is hwVOPGlobalAttachmentMethodConfigured?
Selects, by setting the corresponding bit, which single VoP-to-xDSL attachment method -- 'direct' or 'indirect' -- the network element should use (default direct); the value is persistent across reboots, changing it may require a system reboot to take effect, and the agent should reject a SET that selects both methods at once or a method the device does not support (per hwVOPGlobalAttachmentMethodCapabilties).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.144.1.2.1.2 snmpwalk -v2c -c public <target> HUAWEI-VOP-MIB::hwVOPGlobalAttachmentMethodConfigured
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.144.1.2.1.2.1 snmpget -v2c -c public <target> HUAWEI-VOP-MIB::hwVOPGlobalAttachmentMethodConfigured.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.6.144.1.2.1.2.1 s <value>
Start monitoring Huawei broadband access gateway / xDSL voice-enabled CPE (TR-165 Vector-of-Profiles) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-VOP-MIB::hwVOPGlobalAttachmentMethodConfigured OID value, configure state conditions and alerts, and monitor any Huawei broadband access gateway / xDSL voice-enabled CPE (TR-165 Vector-of-Profiles) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.144 | hwVOPGlobalModule | HUAWEI-VOP-MIB |
| 1.3.6.1.4.1.2011.6.144.1 | hwVOPObjects | HUAWEI-VOP-MIB |
| 1.3.6.1.4.1.2011.6.144.1.2 | hwVOPVectors | HUAWEI-VOP-MIB |
| 1.3.6.1.4.1.2011.6.144.1.2.1 | hwVOPGlobal | HUAWEI-VOP-MIB |
| 1.3.6.1.4.1.2011.6.144.1.2.1.2 | hwVOPGlobalAttachmentMethodConfigured | HUAWEI-VOP-MIB |