All MIBs › HUAWEI-VECTOR-MIB › hwVectoringLegacyCpeToneBlackoutBand
hwVectoringLegacyCpeToneBlackoutBand
Module: HUAWEI-VECTOR-MIB
OID (symbolic): HUAWEI-VECTOR-MIB::hwVectoringLegacyCpeToneBlackoutBand
OID (numeric): 1.3.6.1.4.1.2011.6.171.1.7
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: This object is used to set the blackout band of a legacy CPE. This object takes effect when hwVectoringLegacyCpeActivatePolicy is set to limit. Range of the subcarrier IDs: 0-6956. Two subcarriers are separated by a comma (,). The format is: start subcarrier ID-end subcarrier ID. The start subcarrier ID cannot be greater than the end subcarrier ID. Only eight tone blackout band is supported, for example, 1300-1320,1400-1500. The settings of hwVectoringLegacyCpeReservedBand and hwVectoringLegacyCpeToneBlackoutBand cannot overlap with each other.
What is hwVectoringLegacyCpeToneBlackoutBand?
Defines up to eight subcarrier ranges, as start-end pairs like 1300-1320,1400-1500, that are blacked out for legacy CPEs when hwVectoringLegacyCpeActivatePolicy is set to limit; these ranges must not overlap with the reserved band.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.171.1.7 snmpwalk -v2c -c public <target> HUAWEI-VECTOR-MIB::hwVectoringLegacyCpeToneBlackoutBand
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.171.1.7.1 snmpget -v2c -c public <target> HUAWEI-VECTOR-MIB::hwVectoringLegacyCpeToneBlackoutBand.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.6.171.1.7.1 s <value>
Start monitoring Huawei DSLAM/MSAN VDSL2 access node (vectoring crosstalk cancellation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-VECTOR-MIB::hwVectoringLegacyCpeToneBlackoutBand OID value, configure state conditions and alerts, and monitor any Huawei DSLAM/MSAN VDSL2 access node (vectoring crosstalk cancellation) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.171 | hwVectoringMIB | HUAWEI-VECTOR-MIB |
| 1.3.6.1.4.1.2011.6.171.1 | hwVectoringGlobalConfig | HUAWEI-VECTOR-MIB |
| 1.3.6.1.4.1.2011.6.171.1.7 | hwVectoringLegacyCpeToneBlackoutBand | HUAWEI-VECTOR-MIB |