All MIBs › HUAWEI-UNIVERSAL-POWER-MIB › hwUnivAlarmState
hwUnivAlarmState
Module: HUAWEI-UNIVERSAL-POWER-MIB
OID (symbolic): HUAWEI-UNIVERSAL-POWER-MIB::hwUnivAlarmState
OID (numeric): 1.3.6.1.4.1.2011.2.6.4.10.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Alarm state of universal power normal(1),normal connect(2),connect disconnect(3),disconnect voltageLack(4),voltage lack voltageOver(5),voltage over switchOn(6),switch on switchOff(7),switch off charge(8),charge discharge(9),discharge noCharge(10),no charge allCharge(11),all charge floatCharge(12),float charge commFailure(13),communication failure protect(14),commute protect abnormal(15),commute abnormal
What is hwUnivAlarmState?
This read-only value reports the current state of a specific alarm point on the universal power system, taking values like normal(1), connect(2), disconnect(3), voltageLack(4), voltageOver(5), switchOn(6), switchOff(7), charge(8), discharge(9), commFailure(13), protect(14), or fault(15), among others. Admins monitor it to catch power-system faults such as under/over-voltage conditions, communication failures with the power controller, or battery charge-state transitions. Seeing voltageLack(4) here would immediately tell an admin the connected power system is reporting an under-voltage condition requiring attention.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.2.6.4.10.3.1.3 snmpwalk -v2c -c public <target> HUAWEI-UNIVERSAL-POWER-MIB::hwUnivAlarmState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.2.6.4.10.3.1.3.1 snmpget -v2c -c public <target> HUAWEI-UNIVERSAL-POWER-MIB::hwUnivAlarmState.1
Start monitoring Huawei MD5500 access/environment-monitoring platform (universal power) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-UNIVERSAL-POWER-MIB::hwUnivAlarmState OID value, configure state conditions and alerts, and monitor any Huawei MD5500 access/environment-monitoring platform (universal power) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.2 | products | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.2.6 | musa | HUAWEI-MA5200-MIB |
| 1.3.6.1.4.1.2011.2.6.4 | hwMd5500Mib | HUAWEI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.2.6.4.10 | hwUniversalPower | HUAWEI-UNIVERSAL-POWER-MIB |
| 1.3.6.1.4.1.2011.2.6.4.10.3 | hwUnivPowerAlarmTable | HUAWEI-UNIVERSAL-POWER-MIB |
| 1.3.6.1.4.1.2011.2.6.4.10.3.1 | hwUnivPowerAlarmEntry | HUAWEI-UNIVERSAL-POWER-MIB |
| 1.3.6.1.4.1.2011.2.6.4.10.3.1.3 | hwUnivAlarmState | HUAWEI-UNIVERSAL-POWER-MIB |