All MIBs › HUAWEI-SWITCHOVER-MIB › hwActiveConfiguration
hwActiveConfiguration
Module: HUAWEI-SWITCHOVER-MIB
OID (symbolic): HUAWEI-SWITCHOVER-MIB::hwActiveConfiguration
OID (numeric): 1.3.6.1.4.1.2011.6.22.1.2.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The activation of the configuration files. Options: 1. noactiveConfiguration(-1) -indicates that the configuration files are not activated. 2. activeConfiguration(1) -indicates the activation of the configuration files of the active control board. The activation of the configuration files of the control board causes the system to reset; therefore, it is recommended that you perform the object hwImmediateSave before performing this object to save the data and configuration files. 3. activeStandbyConfiguration(2) -indicates the activation of the configuration files of the standby control board. The activation of the configuration files of the standby control board causes the standby control board to reset.
What is hwActiveConfiguration?
Activates the saved configuration files on the active or standby control board, which resets that board; admins are advised to run hwImmediateSave first to avoid losing unsaved changes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.22.1.2.9 snmpwalk -v2c -c public <target> HUAWEI-SWITCHOVER-MIB::hwActiveConfiguration
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.22.1.2.9.1 snmpget -v2c -c public <target> HUAWEI-SWITCHOVER-MIB::hwActiveConfiguration.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.6.22.1.2.9.1 i <value>
Start monitoring Huawei router/switch with redundant (active/standby) control boards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-SWITCHOVER-MIB::hwActiveConfiguration OID value, configure state conditions and alerts, and monitor any Huawei router/switch with redundant (active/standby) control boards from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.6.22 | hwSwitchOver | HUAWEI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.22.1 | switchoverMibObject | HUAWEI-SWITCHOVER-MIB |
| 1.3.6.1.4.1.2011.6.22.1.2 | hwDataSave | HUAWEI-SWITCHOVER-MIB |
| 1.3.6.1.4.1.2011.6.22.1.2.9 | hwActiveConfiguration | HUAWEI-SWITCHOVER-MIB |