All MIBs › HUAWEI-SNMP-NOTIFICATION-MIB › hwTrapFlowCtrlSwitch
hwTrapFlowCtrlSwitch
Module: HUAWEI-SNMP-NOTIFICATION-MIB
OID (symbolic): HUAWEI-SNMP-NOTIFICATION-MIB::hwTrapFlowCtrlSwitch
OID (numeric): 1.3.6.1.4.1.2011.6.30.10.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Trap traffic control. In certain cases, the alarm module receives the alarm reported by the service module, processes the alarm and then reports the alarm to the NMS. When multiple alarms are reported, the trap traffic in the system increases suddenly. As a result, the NMS is affected and the trap may be lost. Therefore, a buffer function is added to the system to solve the problem. The function is called trap traffic control. This object is used to configure the function. Options: 1. on(1) -indicates that you need to enable trap traffic control. The traffic control is started. 2. off(2)-indicates that you need to disable trap traffic control. The traffic control is stopped.
What is hwTrapFlowCtrlSwitch?
Enables or disables trap traffic control, a buffering mechanism that prevents a sudden burst of alarms from overwhelming the NMS and getting dropped; turning it on protects the management channel during a mass-fault event.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.6.30.10.1 snmpwalk -v2c -c public <target> HUAWEI-SNMP-NOTIFICATION-MIB::hwTrapFlowCtrlSwitch
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.6.30.10.1.1 snmpget -v2c -c public <target> HUAWEI-SNMP-NOTIFICATION-MIB::hwTrapFlowCtrlSwitch.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.6.30.10.1.1 i <value>
Start monitoring Huawei router or switch (alarm/event/trap notification delivery config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-SNMP-NOTIFICATION-MIB::hwTrapFlowCtrlSwitch OID value, configure state conditions and alerts, and monitor any Huawei router or switch (alarm/event/trap notification delivery config) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.6.30 | hwSyntrap | HUAWEI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.30.10 | hwTrapFlowCtrl | HUAWEI-SNMP-NOTIFICATION-MIB |
| 1.3.6.1.4.1.2011.6.30.10.1 | hwTrapFlowCtrlSwitch | HUAWEI-SNMP-NOTIFICATION-MIB |