All MIBs › HUAWEI-QOS-MIB › hwWFQMaxWeight6
hwWFQMaxWeight6
Module: HUAWEI-QOS-MIB
OID (symbolic): HUAWEI-QOS-MIB::hwWFQMaxWeight6
OID (numeric): 1.3.6.1.4.1.2011.5.2.2.1.16
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Maximum bandwidth quota of queue 6
What is hwWFQMaxWeight6?
This OID sets the maximum bandwidth quota (0-100) for queue 6 under WFQ scheduling. An admin adjusts this when queue 6's traffic class needs more burst capacity than its guaranteed minimum weight allows.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.2.2.1.16 snmpwalk -v2c -c public <target> HUAWEI-QOS-MIB::hwWFQMaxWeight6
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.2.2.1.16.1 snmpget -v2c -c public <target> HUAWEI-QOS-MIB::hwWFQMaxWeight6.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.5.2.2.1.16.1 i <value>
Start monitoring Huawei router or switch (ACL-based QoS: rate limiting, marking, queue scheduling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-QOS-MIB::hwWFQMaxWeight6 OID value, configure state conditions and alerts, and monitor any Huawei router or switch (ACL-based QoS: rate limiting, marking, queue scheduling) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.2 | hwAaa | HUAWEI-AAA-MIB |
| 1.3.6.1.4.1.2011.5.2.2 | hwAAAMibTrap | HUAWEI-AAA-MIB |
| 1.3.6.1.4.1.2011.5.2.2.1 | hwAAATrapOid | HUAWEI-AAA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.2.2.1.16 | hwWFQMaxWeight6 | HUAWEI-QOS-MIB |