HUAWEI-PTP-MIB :: hwPtpEnable

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HUAWEI-PTP-MIB › hwPtpEnable

hwPtpEnable

Module: HUAWEI-PTP-MIB

OID (symbolic): HUAWEI-PTP-MIB::hwPtpEnable

OID (numeric): 1.3.6.1.4.1.2011.5.25.187.1.1

Node type: OBJECT-TYPE

Type: EnabledStatus

Access: read-write

Description: Enable PTP function.

What is hwPtpEnable?

Turns IEEE 1588 Precision Time Protocol (PTP) processing on or off for this device; an admin enables it to let the device synchronize its clock over the network, and it comes up disabled by default until explicitly turned on.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.187.1.1
snmpwalk -v2c -c public <target> HUAWEI-PTP-MIB::hwPtpEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.187.1.1.1
snmpget -v2c -c public <target> HUAWEI-PTP-MIB::hwPtpEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.5.25.187.1.1.1 s <value>

Start monitoring Huawei router/switch acting as IEEE 1588 PTP clock (grandmaster/boundary/ordinary) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-PTP-MIB::hwPtpEnable OID value, configure state conditions and alerts, and monitor any Huawei router/switch acting as IEEE 1588 PTP clock (grandmaster/boundary/ordinary) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiEXPERTV2-MIB
1.3.6.1.4.1.2011.5huaweiMgmtHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.5.25huaweiDatacommHUAWEI-3COM-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.5.25.187hwPtpMIBHUAWEI-PTP-MIB
1.3.6.1.4.1.2011.5.25.187.1hwPtpGlobalObjectsHUAWEI-PTP-MIB
1.3.6.1.4.1.2011.5.25.187.1.1hwPtpEnableHUAWEI-PTP-MIB