All MIBs › HUAWEI-NAT-EXT-MIB › hwNatAlgSip
hwNatAlgSip
Module: HUAWEI-NAT-EXT-MIB
OID (symbolic): HUAWEI-NAT-EXT-MIB::hwNatAlgSip
OID (numeric): 1.3.6.1.4.1.2011.5.25.226.2.9.3
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-only
Description: Whether the Sip NAT ALG is enabled.
What is hwNatAlgSip?
Reports whether the SIP Application Level Gateway for NAT is enabled. SIP embeds IP addresses and ports directly in its signaling messages, so this ALG is typically required for VoIP calls to establish correctly through NAT.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.226.2.9.3 snmpwalk -v2c -c public <target> HUAWEI-NAT-EXT-MIB::hwNatAlgSip
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.226.2.9.3.1 snmpget -v2c -c public <target> HUAWEI-NAT-EXT-MIB::hwNatAlgSip.1
Start monitoring Huawei S9300 platform equipment (NAT address/port bindings) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-NAT-EXT-MIB::hwNatAlgSip OID value, configure state conditions and alerts, and monitor any Huawei S9300 platform equipment (NAT address/port bindings) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.25 | huaweiDatacomm | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.226 | hwNatExtMIB | HUAWEI-NAT-EXT-MIB |
| 1.3.6.1.4.1.2011.5.25.226.2 | hwNatExtMIBObjects | HUAWEI-NAT-EXT-MIB |
| 1.3.6.1.4.1.2011.5.25.226.2.9 | hwNatAlg | HUAWEI-NAT-EXT-MIB |
| 1.3.6.1.4.1.2011.5.25.226.2.9.3 | hwNatAlgSip | HUAWEI-NAT-EXT-MIB |