HUAWEI-NAT-EXT-MIB :: hwNatAlgFtp

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHUAWEI-NAT-EXT-MIBhwNatAlgFtp

hwNatAlgFtp

Module: HUAWEI-NAT-EXT-MIB

OID (symbolic): HUAWEI-NAT-EXT-MIB::hwNatAlgFtp

OID (numeric): 1.3.6.1.4.1.2011.5.25.226.2.9.1

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-only

Description: Whether the FTP NAT ALG is enabled.

What is hwNatAlgFtp?

Reports whether the FTP Application Level Gateway for NAT is enabled on this device. FTP's use of dynamic data-channel ports means it normally needs this ALG active to work correctly through NAT, since a plain NAT session can't otherwise rewrite the addresses embedded in FTP control-channel commands.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.226.2.9.1
snmpwalk -v2c -c public <target> HUAWEI-NAT-EXT-MIB::hwNatAlgFtp

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.226.2.9.1.1
snmpget -v2c -c public <target> HUAWEI-NAT-EXT-MIB::hwNatAlgFtp.1

Start monitoring Huawei S9300 platform equipment (NAT address/port bindings) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-NAT-EXT-MIB::hwNatAlgFtp OID value, configure state conditions and alerts, and monitor any Huawei S9300 platform equipment (NAT address/port bindings) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.5huaweiMgmtHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.5.25huaweiDatacommHUAWEI-3COM-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.5.25.226hwNatExtMIBHUAWEI-NAT-EXT-MIB
1.3.6.1.4.1.2011.5.25.226.2hwNatExtMIBObjectsHUAWEI-NAT-EXT-MIB
1.3.6.1.4.1.2011.5.25.226.2.9hwNatAlgHUAWEI-NAT-EXT-MIB
1.3.6.1.4.1.2011.5.25.226.2.9.1hwNatAlgFtpHUAWEI-NAT-EXT-MIB