All MIBs › HUAWEI-NAC-MIB › hwDslamNacSlaveConfigFailReason
hwDslamNacSlaveConfigFailReason
Module: HUAWEI-NAC-MIB
OID (symbolic): HUAWEI-NAC-MIB::hwDslamNacSlaveConfigFailReason
OID (numeric): 1.3.6.1.4.1.2011.5.117.1.2.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Indicates the cause of the failure to configure NAC parameters of the slave port. This node is valid only when the the of hwDslamNacSlaveConfigResult is failed(4). This node is read-only. Options: 1. timeout(1) -indicates configuration timeout. 2. vlanconflict(2) -indicates VLAN ID conflict. 3. unknownparameter(3) -indicates unknown parameters. 4. exist(4) -indicates that the configuration already exists. 5. other(5) -indicates other errors.
What is hwDslamNacSlaveConfigFailReason?
This reports the specific reason a NAC configuration push to a slave node failed, such as timeout(1), vlanconflict(2) for a VLAN ID clash, unknownparameter(3), exist(4) for a configuration that's already present, or other(5); it's only meaningful when hwDslamNacSlaveConfigResult indicates a failure. Admins use this to diagnose exactly why an automated slave provisioning attempt didn't succeed rather than just knowing that it failed. A value of vlanconflict(2) tells the admin the VLAN chosen for the NAC channel already conflicts with an existing configuration on the slave.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.117.1.2.1.8 snmpwalk -v2c -c public <target> HUAWEI-NAC-MIB::hwDslamNacSlaveConfigFailReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.117.1.2.1.8.1 snmpget -v2c -c public <target> HUAWEI-NAC-MIB::hwDslamNacSlaveConfigFailReason.1
Start monitoring Huawei switch/access device supporting NAC-style auto-discovery/zero-touch config with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-NAC-MIB::hwDslamNacSlaveConfigFailReason OID value, configure state conditions and alerts, and monitor any Huawei switch/access device supporting NAC-style auto-discovery/zero-touch config from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.117 | hwNacExt | HUAWEI-NAC-MIB |
| 1.3.6.1.4.1.2011.5.117.1 | hwNacMibObjects | HUAWEI-NAC-MIB |
| 1.3.6.1.4.1.2011.5.117.1.2 | hwDslamNacSlaveInfoTable | HUAWEI-NAC-MIB |
| 1.3.6.1.4.1.2011.5.117.1.2.1 | hwDslamNacSlaveInfoEntry | HUAWEI-NAC-MIB |
| 1.3.6.1.4.1.2011.5.117.1.2.1.8 | hwDslamNacSlaveConfigFailReason | HUAWEI-NAC-MIB |