HUAWEI-MPLSOAM-MIB :: hwMplsOamIgrDefectType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHUAWEI-MPLSOAM-MIBhwMplsOamIgrDefectType

hwMplsOamIgrDefectType

Module: HUAWEI-MPLSOAM-MIB

OID (symbolic): HUAWEI-MPLSOAM-MIB::hwMplsOamIgrDefectType

OID (numeric): 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.12

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Defect is defined as interruption of the capability of a transport entity (e.g., network connection) to transfer user or OAM information. There are six types of defect: 0: no defect; 1: dServer; 2: dPeerMe; 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSI-Mismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSI-Mismerge, Trail Termination Source Identifier Mismerge defect; 6: dExcess, Receiving excess rate of CV/FFD; 7: dUnknown, Unknown defect in the MPLS network.. 8: dOamFail, AutoProtocal timer expires. 9: dIngressDown.

What is hwMplsOamIgrDefectType?

This read-only enumeration reports the specific type of defect detected on this LSP at ingress — options include dLOCV (loss of connectivity verification), dTTSI-Mismatch/Mismerge (identifier problems), dExcess (receiving OAM packets too fast), dOamFail, and dIngressDown, among others, or nondefect if healthy. Admins use this to pinpoint the exact failure mode behind an ingress OAM alarm rather than just knowing something is wrong.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.12
snmpwalk -v2c -c public <target> HUAWEI-MPLSOAM-MIB::hwMplsOamIgrDefectType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.12.7.1.1.2.1.12.1
snmpget -v2c -c public <target> HUAWEI-MPLSOAM-MIB::hwMplsOamIgrDefectType.1

Start monitoring Huawei MPLS-enabled router or switch (LSP OAM connectivity verification) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-MPLSOAM-MIB::hwMplsOamIgrDefectType OID value, configure state conditions and alerts, and monitor any Huawei MPLS-enabled router or switch (LSP OAM connectivity verification) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.5huaweiMgmtHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.5.12hwMplsHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.5.12.7hwMplsOamHUAWEI-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.5.12.7.1hwMplsOamPsHUAWEI-MPLSOAM-MIB
1.3.6.1.4.1.2011.5.12.7.1.1hwMplsOamObjectsHUAWEI-MPLSOAM-MIB
1.3.6.1.4.1.2011.5.12.7.1.1.2hwMplsOamIgrTableHUAWEI-MPLSOAM-MIB
1.3.6.1.4.1.2011.5.12.7.1.1.2.1hwMplsOamIgrEntryHUAWEI-MPLSOAM-MIB
1.3.6.1.4.1.2011.5.12.7.1.1.2.1.12hwMplsOamIgrDefectTypeHUAWEI-MPLSOAM-MIB