All MIBs › HUAWEI-L2IF-MIB › hwL2IfIsolateGroupEnable
hwL2IfIsolateGroupEnable
Module: HUAWEI-L2IF-MIB
OID (symbolic): HUAWEI-L2IF-MIB::hwL2IfIsolateGroupEnable
OID (numeric): 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.31
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-write
Description: The value enabled(1) indicates that the port is a member of the port-isolate group; disable(2) indicates that the port is not a member of the port-isolate group. The default value is disable(2).
What is hwL2IfIsolateGroupEnable?
This read-write EnabledStatus, defaulting to disable(2), marks whether the port is a member of the port-isolate group; enabled(1) means traffic from this port cannot reach other isolated-group members directly. An admin enables it on ports (e.g. hotel-room or guest-VLAN drops) that must not see each other's traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.31 snmpwalk -v2c -c public <target> HUAWEI-L2IF-MIB::hwL2IfIsolateGroupEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.31.1 snmpget -v2c -c public <target> HUAWEI-L2IF-MIB::hwL2IfIsolateGroupEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.31.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hwL2IfIsolateGroupEnable.1
Start monitoring Huawei switch (Layer 2 interface, hybrid/trunk port config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-L2IF-MIB::hwL2IfIsolateGroupEnable OID value, configure state conditions and alerts, and monitor any Huawei switch (Layer 2 interface, hybrid/trunk port config) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.25 | huaweiDatacomm | HUAWEI-3COM-OID-MIB |
| 1.3.6.1.4.1.2011.5.25.42 | hwL2Mgmt | HUAWEI-IPDSLAM-MSTP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.42.1 | hwL2IfMib | HUAWEI-L2IF-MIB |
| 1.3.6.1.4.1.2011.5.25.42.1.1 | hwL2IfObjects | HUAWEI-L2IF-MIB |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1 | hwL2Interface | HUAWEI-L2IF-MIB |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3 | hwL2IfTable | HUAWEI-L2IF-MIB |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1 | hwL2IfEntry | HUAWEI-L2IF-MIB |
| 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.31 | hwL2IfIsolateGroupEnable | HUAWEI-L2IF-MIB |