All MIBs › HUAWEI-CLK-MIB › hwClkInBitsType
hwClkInBitsType
Module: HUAWEI-CLK-MIB
OID (symbolic): HUAWEI-CLK-MIB::hwClkInBitsType
OID (numeric): 1.3.6.1.4.1.2011.6.25.1.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: BITS clock type: bits-2MHz(1), -- the bits type is 2MHz bits-2Mbps(2), -- the bits type is 2bps bits-type-none(255) -- the clock source is not a bits clock The impedance value must been set when the clock source is a bits clock
What is hwClkInBitsType?
This read-create enumerated value sets the signal type of a BITS clock input, choosing between a 2MHz sine-wave reference, a framed 2Mbps E1-style signal, or none(255) when the source isn't a BITS clock. Admins configure it to match the format actually being delivered by their external timing source, alongside the corresponding impedance setting. For example, an admin fed from a GPS-derived 2MHz reference clock would set hwClkInBitsType to bits-type-2MHz(1).
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.6 | huaweiUtility | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.6.25 | hwClock | HUAWEI-CLK-MIB |
| 1.3.6.1.4.1.2011.6.25.1 | hwClkMibObjects | HUAWEI-CLK-MIB |
| 1.3.6.1.4.1.2011.6.25.1.1 | hwClockInManageTable | HUAWEI-CLK-MIB |
| 1.3.6.1.4.1.2011.6.25.1.1.1 | hwClockInManageEntry | HUAWEI-CLK-MIB |
| 1.3.6.1.4.1.2011.6.25.1.1.1.7 | hwClkInBitsType | HUAWEI-CLK-MIB |