HUAWEI-CDP-COMPLIANCE-MIB :: hwCdpCompliancePortConfigHoldTime

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HUAWEI-CDP-COMPLIANCE-MIB › hwCdpCompliancePortConfigHoldTime

hwCdpCompliancePortConfigHoldTime

Module: HUAWEI-CDP-COMPLIANCE-MIB

OID (symbolic): HUAWEI-CDP-COMPLIANCE-MIB::hwCdpCompliancePortConfigHoldTime

OID (numeric): 1.3.6.1.4.1.2011.5.25.198.1.1.3.1.3

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The seconds of holding the recieved CDP packets. The received CDP packets wiil be aged if no new CDP packets received after so many seconds. This value should equal to or greater than the TTL value in the received CDP packets.

What is hwCdpCompliancePortConfigHoldTime?

This value, from 10 to 254 seconds and defaulting to 180, sets how long a received CDP packet is held on the port before it is aged out if no new CDP packet arrives, and should be at least the TTL carried in the received packets. Admins tune it to control how quickly stale CDP neighbor information is discarded when a neighbor stops advertising. For example, raising it to 240 seconds would tolerate longer gaps between a neighbor's CDP advertisements before flagging it as gone.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.198.1.1.3.1.3
snmpwalk -v2c -c public <target> HUAWEI-CDP-COMPLIANCE-MIB::hwCdpCompliancePortConfigHoldTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.198.1.1.3.1.3.1
snmpget -v2c -c public <target> HUAWEI-CDP-COMPLIANCE-MIB::hwCdpCompliancePortConfigHoldTime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.5.25.198.1.1.3.1.3.1 i <value>

Start monitoring Huawei switch interoperating with Cisco CDP in mixed-vendor networks with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-CDP-COMPLIANCE-MIB::hwCdpCompliancePortConfigHoldTime OID value, configure state conditions and alerts, and monitor any Huawei switch interoperating with Cisco CDP in mixed-vendor networks from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiEXPERTV2-MIB
1.3.6.1.4.1.2011.5huaweiMgmtHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.5.25huaweiDatacommHUAWEI-3COM-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.5.25.198hwCdpComplianceMIBHUAWEI-CDP-COMPLIANCE-MIB
1.3.6.1.4.1.2011.5.25.198.1hwCdpComplianceObjectsHUAWEI-CDP-COMPLIANCE-MIB
1.3.6.1.4.1.2011.5.25.198.1.1hwCdpComplianceConfigurationHUAWEI-CDP-COMPLIANCE-MIB
1.3.6.1.4.1.2011.5.25.198.1.1.3hwCdpCompliancePortConfigTableHUAWEI-CDP-COMPLIANCE-MIB
1.3.6.1.4.1.2011.5.25.198.1.1.3.1hwCdpCompliancePortConfigEntryHUAWEI-CDP-COMPLIANCE-MIB
1.3.6.1.4.1.2011.5.25.198.1.1.3.1.3hwCdpCompliancePortConfigHoldTimeHUAWEI-CDP-COMPLIANCE-MIB