All MIBs › HPN-ICF-SMLK-MIB › hpnicfSmlkPreemptionDelay
hpnicfSmlkPreemptionDelay
Module: HPN-ICF-SMLK-MIB
OID (symbolic): HPN-ICF-SMLK-MIB::hpnicfSmlkPreemptionDelay
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.147.1.1.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description: Preemption delay for a smart link group, in the range of 0 to 300 seconds.
What is hpnicfSmlkPreemptionDelay?
This read-create Integer32 value (0-300 seconds) sets how long the switch waits before a preemption-eligible port takes back over as the active link in a Smart Link group. An admin uses this delay to avoid link flapping by giving a recovering primary link time to stabilize before it preempts the current standby-turned-active port. Setting this to 30 seconds means after a preferred link's role condition is met, the switch waits 30 seconds before switching traffic back to it.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.147 | hpnicfSmlk | HPN-ICF-SMLK-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.147.1 | hpnicfSmlkObject | HPN-ICF-SMLK-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.147.1.1 | hpnicfSmlkGroupTable | HPN-ICF-SMLK-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.147.1.1.1 | hpnicfSmlkGroupEntry | HPN-ICF-SMLK-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.147.1.1.1.5 | hpnicfSmlkPreemptionDelay | HPN-ICF-SMLK-MIB |