All MIBs › HPN-ICF-MIRRORGROUP-MIB › hpnicfMGStatus
hpnicfMGStatus
Module: HPN-ICF-MIRRORGROUP-MIB
OID (symbolic): HPN-ICF-MIRRORGROUP-MIB::hpnicfMGStatus
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.68.1.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of a mirror group. A mirror group is inactive
when it was created.
The status of a mirror group can be changed automatically from inactive
to active when appropriate conditions were met. Also, it can be changed
automatically from active to inactive when these conditions disappeared.
Followings are conditions for a mirror group to become active:
group type conditions
============================================================================
local any source (mirroring-port, mirroring-VLAN, or mirroring-CPU),
monitor-port
remoteSource If one of the three conditions is satisfied,
remoteSource group would be active.
1) any source (mirroring-port, mirroring-VLAN, or mirroring-CPU),
remote-probe VLAN,
configurable reflector-port (which is not supported on some devices)
2) any source (mirroring-port, mirroring-VLAN, or mirroring-CPU),
remote-probe VLAN,
egress-port (which is not supported on some devices)
3) any source (mirroring-port, mirroring-VLAN, or mirroring-CPU),
remote-probe VLAN,
fixed reflector-port(which is not supported on some devices)
remoteDestination monitor-port, remote-probe VLAN
What is hpnicfMGStatus?
This read-only object reports whether a mirror group is currently active or inactive, where active means all the required conditions for that group type, such as having both a mirroring source and a monitor port configured, have been met. A mirror group starts inactive when created and the device automatically flips it to active or back to inactive as its required source, monitor-port, remote-probe VLAN, and reflector or egress-port conditions are satisfied or removed. For example, a local mirror group configured with a source port but no monitor port yet would show inactive until an admin also assigns a monitor port, at which point it automatically becomes active.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.68.1.1.1.1.3 snmpwalk -v2c -c public <target> HPN-ICF-MIRRORGROUP-MIB::hpnicfMGStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.68.1.1.1.1.3.1 snmpget -v2c -c public <target> HPN-ICF-MIRRORGROUP-MIB::hpnicfMGStatus.1
Start monitoring HP/H3C Comware switch (port mirror group config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-MIRRORGROUP-MIB::hpnicfMGStatus OID value, configure state conditions and alerts, and monitor any HP/H3C Comware switch (port mirror group config) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.68 | hpnicfMirrGroup | HPN-ICF-MIRRORGROUP-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.68.1 | hpnicfMGInfoObjects | HPN-ICF-MIRRORGROUP-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.68.1.1 | hpnicfMGObjects | HPN-ICF-MIRRORGROUP-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.68.1.1.1 | hpnicfMGTable | HPN-ICF-MIRRORGROUP-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.68.1.1.1.1 | hpnicfMGEntry | HPN-ICF-MIRRORGROUP-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.68.1.1.1.1.3 | hpnicfMGStatus | HPN-ICF-MIRRORGROUP-MIB |