All MIBs › HPN-ICF-LswMSTP-MIB › hpnicfdot1sMstiStpOperPortPointToPoint
hpnicfdot1sMstiStpOperPortPointToPoint
Module: HPN-ICF-LswMSTP-MIB
OID (symbolic): HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpOperPortPointToPoint
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.29
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates whether the port has connected to a point-to-point link or not. The value of the node is an operative value. The administrative value can be read from the node hpnicfdot1sMstiStpPortPointToPoint. If the value of hpnicfdot1sMstiStpPortPointToPoint is auto, the value of this node should be calculated by the network topology of this port. If the value of hpnicfdot1sMstiStpPortPointToPoint is forceFalse, the value of this node is false. If the value of hpnicfdot1sMstiStpPortPointToPoint is forceTrue, the value of this node is true.
What is hpnicfdot1sMstiStpOperPortPointToPoint?
This reports whether the port has actually connected to a point-to-point link (true or false), the operative counterpart to the administrative hpnicfdot1sMstiStpPortPointToPoint setting; per the MIB's own description, when the admin setting is auto this value is calculated from topology, and when forced it directly reflects forceTrue/forceFalse. An admin reads this to confirm the port is actually operating in point-to-point mode, which is required for rapid RSTP/MSTP transitions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.29 snmpwalk -v2c -c public <target> HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpOperPortPointToPoint
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.29.1 snmpget -v2c -c public <target> HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpOperPortPointToPoint.1
Start monitoring HP/H3C Comware Layer 2 switch (Multiple Spanning Tree Protocol) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpOperPortPointToPoint OID value, configure state conditions and alerts, and monitor any HP/H3C Comware Layer 2 switch (Multiple Spanning Tree Protocol) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8 | hpnicfRhw | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.35 | hpnicflswCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14 | hpnicfdot1sMstp | HPN-ICF-LswMSTP-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20 | hpnicfdot1sPortTable | HPN-ICF-LswMSTP-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1 | hpnicfdot1sPortEntry | HPN-ICF-LswMSTP-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.29 | hpnicfdot1sMstiStpOperPortPointToPoint | HPN-ICF-LswMSTP-MIB |