All MIBs › HPN-ICF-CATV-TRANSCEIVER-MIB › hpnicfCATVTransOutputLvlLowerThr
hpnicfCATVTransOutputLvlLowerThr
Module: HPN-ICF-CATV-TRANSCEIVER-MIB
OID (symbolic): HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransOutputLvlLowerThr
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.94.2.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: A threshold for the CATV transceiver's output level. When the output level of CATV transceiver is lower than threshold, a trap should be generated.
What is hpnicfCATVTransOutputLvlLowerThr?
This read-write Integer32, in dBuV, sets the low-level alarm threshold for the CATV transceiver's output signal, with a trap generated when hpnicfCATVTransOutputLevel falls below this configured value per the description. An admin sets this so a weakening downstream RF output triggers proactive notification rather than being discovered only through subscriber complaints. For example, configuring this to 45 dBuV would cause an alarm if the transceiver's output drops under that level.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.94.2.1.2 snmpwalk -v2c -c public <target> HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransOutputLvlLowerThr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.94.2.1.2.1 snmpget -v2c -c public <target> HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransOutputLvlLowerThr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.94.2.1.2.1 i <value>
Start monitoring HP Networking switch with CATV (hybrid fiber-coax) optical transceiver module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransOutputLvlLowerThr OID value, configure state conditions and alerts, and monitor any HP Networking switch with CATV (hybrid fiber-coax) optical transceiver module from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.94 | hpnicfCATVTransceiver | HPN-ICF-CATV-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.94.2 | hpnicfCATVTransceiverMan | HPN-ICF-CATV-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.94.2.1 | hpnicfCATVTransCtrlScalarObjects | HPN-ICF-CATV-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.94.2.1.2 | hpnicfCATVTransOutputLvlLowerThr | HPN-ICF-CATV-TRANSCEIVER-MIB |