All MIBs › HPN-ICF-CATV-TRANSCEIVER-MIB › hpnicfCATVTransOutputLevel
hpnicfCATVTransOutputLevel
Module: HPN-ICF-CATV-TRANSCEIVER-MIB
OID (symbolic): HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransOutputLevel
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.94.1.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The output level of CATV transceiver. If transceiver is not on site, the value should be zero.
What is hpnicfCATVTransOutputLevel?
This read-only Integer32, measured in dBuV per its UNITS clause, reports the output signal level of the CATV transceiver, reading zero when the transceiver is not on site per the description. An admin uses this to verify the transceiver is delivering an adequate RF output level downstream to subscriber equipment. For example, a reading of 55 dBuV could be checked against hpnicfCATVTransOutputLvlLowerThr to confirm it's still above the configured minimum.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.94.1.1.3 snmpwalk -v2c -c public <target> HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransOutputLevel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.94.1.1.3.1 snmpget -v2c -c public <target> HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransOutputLevel.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpnicfCATVTransOutputLevel.1
Start monitoring HP Networking switch with CATV (hybrid fiber-coax) optical transceiver module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransOutputLevel OID value, configure state conditions and alerts, and monitor any HP Networking switch with CATV (hybrid fiber-coax) optical transceiver module from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.94 | hpnicfCATVTransceiver | HPN-ICF-CATV-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.94.1 | hpnicfCATVTransStatus | HPN-ICF-CATV-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.94.1.1 | hpnicfCATVTransStatusScalarObjects | HPN-ICF-CATV-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.94.1.1.3 | hpnicfCATVTransOutputLevel | HPN-ICF-CATV-TRANSCEIVER-MIB |