All MIBs › HPN-ICF-CATV-TRANSCEIVER-MIB › hpnicfCATVTransInputPwrLowerThr
hpnicfCATVTransInputPwrLowerThr
Module: HPN-ICF-CATV-TRANSCEIVER-MIB
OID (symbolic): HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransInputPwrLowerThr
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.94.2.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: A threshold for the CATV transceiver's input power. When the input power of CATV transceiver is lower than threshold, a trap should be generated.
What is hpnicfCATVTransInputPwrLowerThr?
This read-write Integer32, in dBm, sets the low-power alarm threshold for the CATV transceiver's input signal, and per the description a trap is generated when hpnicfCATVTransInputPwr drops below this configured value. An admin tunes this threshold to match acceptable signal levels for their CATV plant so they're alerted before a weak signal causes service degradation. For example, setting this to -20 dBm would trigger an alarm trap if the measured input power falls below that level.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.94.2.1.1 snmpwalk -v2c -c public <target> HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransInputPwrLowerThr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.94.2.1.1.1 snmpget -v2c -c public <target> HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransInputPwrLowerThr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.94.2.1.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> hpnicfCATVTransInputPwrLowerThr.1
Start monitoring HP Networking switch with CATV (hybrid fiber-coax) optical transceiver module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransInputPwrLowerThr OID value, configure state conditions and alerts, and monitor any HP Networking switch with CATV (hybrid fiber-coax) optical transceiver module from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.94 | hpnicfCATVTransceiver | HPN-ICF-CATV-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.94.2 | hpnicfCATVTransceiverMan | HPN-ICF-CATV-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.94.2.1 | hpnicfCATVTransCtrlScalarObjects | HPN-ICF-CATV-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.94.2.1.1 | hpnicfCATVTransInputPwrLowerThr | HPN-ICF-CATV-TRANSCEIVER-MIB |