All MIBs › HPN-ICF-CATV-TRANSCEIVER-MIB › hpnicfCATVTransInputPwr
hpnicfCATVTransInputPwr
Module: HPN-ICF-CATV-TRANSCEIVER-MIB
OID (symbolic): HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransInputPwr
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.94.1.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The input power of CATV transceiver. If transceiver is not on site, the value should be zero.
What is hpnicfCATVTransInputPwr?
This read-only Integer32, measured in dBm per its UNITS clause, reports the input power level received by the CATV transceiver, and the description notes it reads zero if the transceiver is not physically installed. An admin monitors this to catch a weak or degraded CATV signal feeding into the transceiver before it causes service issues. For example, a reading of -15 dBm might be compared against the configured hpnicfCATVTransInputPwrLowerThr to decide whether the signal is too weak.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.94.1.1.2 snmpwalk -v2c -c public <target> HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransInputPwr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.94.1.1.2.1 snmpget -v2c -c public <target> HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransInputPwr.1
Start monitoring HP Networking switch with CATV (hybrid fiber-coax) optical transceiver module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransInputPwr OID value, configure state conditions and alerts, and monitor any HP Networking switch with CATV (hybrid fiber-coax) optical transceiver module from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.94 | hpnicfCATVTransceiver | HPN-ICF-CATV-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.94.1 | hpnicfCATVTransStatus | HPN-ICF-CATV-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.94.1.1 | hpnicfCATVTransStatusScalarObjects | HPN-ICF-CATV-TRANSCEIVER-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.94.1.1.2 | hpnicfCATVTransInputPwr | HPN-ICF-CATV-TRANSCEIVER-MIB |