HP700RX-MIB :: slipRemoteAddress

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHP700RX-MIBslipRemoteAddress

slipRemoteAddress

Module: HP700RX-MIB

OID (symbolic): HP700RX-MIB::slipRemoteAddress

OID (numeric): 1.3.6.1.4.1.11.2.3.9.3.1.2.15

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: The address used for the remote (host) end end of the SLIP connection.

What is slipRemoteAddress?

The IP address used for the remote (host) end of the terminal's SLIP connection. An admin pairs this with slipLocalAddress so the point-to-point serial link has both endpoints correctly addressed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.3.1.2.15
snmpwalk -v2c -c public <target> HP700RX-MIB::slipRemoteAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.3.1.2.15.1
snmpget -v2c -c public <target> HP700RX-MIB::slipRemoteAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.3.1.2.15.1 s <value>

Start monitoring Legacy HP 700/RX X terminal (thin client) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP700RX-MIB::slipRemoteAddress OID value, configure state conditions and alerts, and monitor any Legacy HP 700/RX X terminal (thin client) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.3hpsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9net_peripheralCLJ8500-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.3.9.3hpXStationHP700RX-MIB
1.3.6.1.4.1.11.2.3.9.3.1configHP700RX-MIB
1.3.6.1.4.1.11.2.3.9.3.1.2networkHP700RX-MIB
1.3.6.1.4.1.11.2.3.9.3.1.2.15slipRemoteAddressHP700RX-MIB