HP700RX-MIB :: resetEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsHP700RX-MIBresetEnable

resetEnable

Module: HP700RX-MIB

OID (symbolic): HP700RX-MIB::resetEnable

OID (numeric): 1.3.6.1.4.1.11.2.3.9.3.1.6.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This variable indicates whether remote (through SNMP) resets are allowed.

What is resetEnable?

A read-write flag controlling whether the terminal can be remotely reset over SNMP (via the separate reboot object). An admin disables this on terminals that should not be remotely rebootable, as a safeguard against accidental or unauthorized resets.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.3.1.6.1
snmpwalk -v2c -c public <target> HP700RX-MIB::resetEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.3.1.6.1.1
snmpget -v2c -c public <target> HP700RX-MIB::resetEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.3.1.6.1.1 i <value>

Start monitoring Legacy HP 700/RX X terminal (thin client) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP700RX-MIB::resetEnable OID value, configure state conditions and alerts, and monitor any Legacy HP 700/RX X terminal (thin client) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.3hpsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9net_peripheralCLJ8500-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.3.9.3hpXStationHP700RX-MIB
1.3.6.1.4.1.11.2.3.9.3.1configHP700RX-MIB
1.3.6.1.4.1.11.2.3.9.3.1.6resetHP700RX-MIB
1.3.6.1.4.1.11.2.3.9.3.1.6.1resetEnableHP700RX-MIB