All MIBs › HP700RX-MIB › etherInAlignErrors

etherInAlignErrors

OID (symbolic): HP700RX-MIB::etherInAlignErrors

OID (numeric): 1.3.6.1.4.1.11.2.3.9.3.1.4.33

Node type: OBJECT-TYPE

Type: Counter

Access: read-only

Description: The number of packets received on the Ethernet interface that were not an integral number of octets in length.

What is etherInAlignErrors?

A counter of Ethernet packets received that were not made up of a whole number of octets (a framing/alignment error). An admin treats this, like CRC errors, as evidence of a physical-layer problem such as a bad cable or duplex mismatch.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.3.1.4.33
snmpwalk -v2c -c public <target> HP700RX-MIB::etherInAlignErrors

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.3.1.4.33.1
snmpget -v2c -c public <target> HP700RX-MIB::etherInAlignErrors.1

Start monitoring Legacy HP 700/RX X terminal (thin client) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HP700RX-MIB::etherInAlignErrors OID value, configure state conditions and alerts, and monitor any Legacy HP 700/RX X terminal (thin client) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.11	hp	CLJ8500-MIB
1.3.6.1.4.1.11.2	nm	CLJ8500-MIB
1.3.6.1.4.1.11.2.3	hpsystem	CLJ8500-MIB
1.3.6.1.4.1.11.2.3.9	net_peripheral	CLJ8500-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.11.2.3.9.3	hpXStation	HP700RX-MIB
1.3.6.1.4.1.11.2.3.9.3.1	config	HP700RX-MIB
1.3.6.1.4.1.11.2.3.9.3.1.4	statistics	HP700RX-MIB
1.3.6.1.4.1.11.2.3.9.3.1.4.33	etherInAlignErrors	HP700RX-MIB

HP700RX-MIB :: etherInAlignErrors

etherInAlignErrors

Module

This MIB depends on