All MIBs › HMRINGARC-MGMT-SNMP-MIB › hmArcCheckStatusType
hmArcCheckStatusType
Module: HMRINGARC-MGMT-SNMP-MIB
OID (symbolic): HMRINGARC-MGMT-SNMP-MIB::hmArcCheckStatusType
OID (numeric): 1.3.6.1.4.1.248.14.5.7.2.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status an ARC device in the connected topology reported.
otherRm(1): the device detected another active Redundancy Manager. loop(2): unclear topology detected. This may be a loop or a net segment which is connected to the ring with Rapid Spanning Tree. alreadyConfigured(3): the device already has a ring configured. unsupportedOption(4): the device does not support one of the ARC Manager options. openRing(5): the ARC Manager has detected an open Ring. configFailed(6): the configuration of the device failed. duplexMode(7): at least one Ring Port of the device is not in full duplex mode. noArcDevices(8): there is no device in the ring which supports the ARC Protocol, or all devices have hmArcClientAdminStatus set to disabled. portState(9): at least one Ring Port of the device is not properly configured. info(10): the device reported just additional information.
What is hmArcCheckStatusType?
The specific condition a ring device reported during an ARC topology check, such as loop(2) for an unclear/looped topology, openRing(5) for a broken ring, duplexMode(7) for a ring port not in full duplex, or configFailed(6); an admin uses this to pinpoint why automatic ring configuration can't proceed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.5.7.2.1.1.4 snmpwalk -v2c -c public <target> HMRINGARC-MGMT-SNMP-MIB::hmArcCheckStatusType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.5.7.2.1.1.4.1 snmpget -v2c -c public <target> HMRINGARC-MGMT-SNMP-MIB::hmArcCheckStatusType.1
Start monitoring Hirschmann industrial Ethernet switch (Automatic Ring Configuration redundancy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HMRINGARC-MGMT-SNMP-MIB::hmArcCheckStatusType OID value, configure state conditions and alerts, and monitor any Hirschmann industrial Ethernet switch (Automatic Ring Configuration redundancy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.14 | hmConfiguration | HMPRIV-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.5 | hmRingRedundancy | HMRING-MGMT-SNMP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.14.5.7 | hmARC | HMRINGARC-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.5.7.2 | hmArcManagerStatus | HMRINGARC-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.5.7.2.1 | hmArcCheckResultTable | HMRINGARC-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.5.7.2.1.1 | hmArcCheckResultEntry | HMRINGARC-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.5.7.2.1.1.4 | hmArcCheckStatusType | HMRINGARC-MGMT-SNMP-MIB |