All MIBs › HMRING-MGMT-SNMP-MIB › hmRingCplControlMode
hmRingCplControlMode
Module: HMRING-MGMT-SNMP-MIB
OID (symbolic): HMRING-MGMT-SNMP-MIB::hmRingCplControlMode
OID (numeric): 1.3.6.1.4.1.248.14.5.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Control mode of the ring coupling which can only be chosen by the slave, the master just reports his current control mode. unknown(3) cannot be set. In outband(1) mode an additional line must connect the control interfaces between the two partners in the ring coupling. In inband(2) mode only the coupling link port is needed. In local(4) mode the coupling link port and the partner port are located on the same switch. disable(5) deactivates the ring coupling functionality.
What is hmRingCplControlMode?
Selects how the two switches in a ring coupling exchange control information: outband(1) uses a dedicated extra cable between control ports, inband(2) relies solely on the coupling link itself, and local(4) is used when both coupling ports sit on the same switch; unknown(3) is reported only, never set, and disable(5) turns coupling off. Only the slave side of the pair can set this — the master just reports back its current mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.5.2.1.7 snmpwalk -v2c -c public <target> HMRING-MGMT-SNMP-MIB::hmRingCplControlMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.5.2.1.7.1 snmpget -v2c -c public <target> HMRING-MGMT-SNMP-MIB::hmRingCplControlMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.14.5.2.1.7.1 i <value>
Start monitoring Hirschmann industrial Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HMRING-MGMT-SNMP-MIB::hmRingCplControlMode OID value, configure state conditions and alerts, and monitor any Hirschmann industrial Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.14 | hmConfiguration | HMPRIV-MGMT-SNMP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.14.5 | hmRingRedundancy | HMRING-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.5.2 | hmRingCouplingTable | HMRING-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.5.2.1 | hmRingCouplingEntry | HMRING-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.5.2.1.7 | hmRingCplControlMode | HMRING-MGMT-SNMP-MIB |