HMRING-MGMT-SNMP-MIB :: hmRingCplControlIfIndex

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HMRING-MGMT-SNMP-MIB › hmRingCplControlIfIndex

hmRingCplControlIfIndex

Module: HMRING-MGMT-SNMP-MIB

OID (symbolic): HMRING-MGMT-SNMP-MIB::hmRingCplControlIfIndex

OID (numeric): 1.3.6.1.4.1.248.14.5.2.1.5

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Interface index of the control link in case of outband-control. Note that only those ports can be chosen which do not belong to another L2 redundancy mechanism like ring redundancy or dual homing and that row creation is only done by writing to hmRingCplRowStatus.

What is hmRingCplControlIfIndex?

Interface index of the dedicated control link port used for out-of-band ring-coupling signaling; it must be a port not already used by another Layer 2 redundancy mechanism. An admin configures this when choosing outband control mode so the two coupling partners can exchange status over a separate cable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.5.2.1.5
snmpwalk -v2c -c public <target> HMRING-MGMT-SNMP-MIB::hmRingCplControlIfIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.5.2.1.5.1
snmpget -v2c -c public <target> HMRING-MGMT-SNMP-MIB::hmRingCplControlIfIndex.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.248.14.5.2.1.5.1 i <value>

Start monitoring Hirschmann industrial Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HMRING-MGMT-SNMP-MIB::hmRingCplControlIfIndex OID value, configure state conditions and alerts, and monitor any Hirschmann industrial Ethernet switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.248hirschmannHIRSCHMANN-GENERIC-ERROR-MIB
1.3.6.1.4.1.248.14hmConfigurationHMPRIV-MGMT-SNMP-MIB
Numeric OIDNameModule
1.3.6.1.4.1.248.14.5hmRingRedundancyHMRING-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.5.2hmRingCouplingTableHMRING-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.5.2.1hmRingCouplingEntryHMRING-MGMT-SNMP-MIB
1.3.6.1.4.1.248.14.5.2.1.5hmRingCplControlIfIndexHMRING-MGMT-SNMP-MIB