All MIBs › HMRING-MGMT-SNMP-MIB › hmRingCplConfigOperState
hmRingCplConfigOperState
Module: HMRING-MGMT-SNMP-MIB
OID (symbolic): HMRING-MGMT-SNMP-MIB::hmRingCplConfigOperState
OID (numeric): 1.3.6.1.4.1.248.14.5.2.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Operational state of the ring coupling configuration.
slaveCouplingLinkError(2) indicates that the coupling link is not connected with the coupling port of the slave but with another port of the slave.
In case of outband control additional failures can be detected: slaveControlLinkError(3) indicates that the control port of the slave has either no link or the link fails. masterControlLinkError(4) indicates that the control link is not connected with the control port of the master but with another port of the master. twoSlaves(5) is returned when two slaves are connected by the control line.
localPartnerLinkError(6) indicates that the partner coupling link is not connected with the partner port of the slave but with another port of the slave in local control mode. localInvalidCouplingPort(7) indicates that in local mode the coupling line is connected to another switch and not on the same switch like the partner line.
couplingPortNotAvailable(8), controlPortNotAvailable(9) and partnerPortNotAvailable(10) indicate that this port is not available because the module related to this port is not available or the port does not exist on this module.
What is hmRingCplConfigOperState?
Surfaces specific cabling and configuration mistakes in a ring-coupling setup, such as slaveCouplingLinkError(2) when the coupling cable is plugged into the wrong port on the slave, masterControlLinkError(4) or twoSlaves(5) for out-of-band control wiring mistakes, and couplingPortNotAvailable(8)/controlPortNotAvailable(9)/partnerPortNotAvailable(10) when a referenced port doesn't physically exist on the module. An admin checks this value first when a newly configured ring coupling isn't behaving as expected, since it pinpoints exactly which cable or port is wrong.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.14.5.2.1.15 snmpwalk -v2c -c public <target> HMRING-MGMT-SNMP-MIB::hmRingCplConfigOperState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.14.5.2.1.15.1 snmpget -v2c -c public <target> HMRING-MGMT-SNMP-MIB::hmRingCplConfigOperState.1
Start monitoring Hirschmann industrial Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HMRING-MGMT-SNMP-MIB::hmRingCplConfigOperState OID value, configure state conditions and alerts, and monitor any Hirschmann industrial Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.14 | hmConfiguration | HMPRIV-MGMT-SNMP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.14.5 | hmRingRedundancy | HMRING-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.5.2 | hmRingCouplingTable | HMRING-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.5.2.1 | hmRingCouplingEntry | HMRING-MGMT-SNMP-MIB |
| 1.3.6.1.4.1.248.14.5.2.1.15 | hmRingCplConfigOperState | HMRING-MGMT-SNMP-MIB |