All MIBs › HM2-VPN-MIB › hm2VpnConnIkeAuthLocType
hm2VpnConnIkeAuthLocType
Module: HM2-VPN-MIB
OID (symbolic): HM2-VPN-MIB::hm2VpnConnIkeAuthLocType
OID (numeric): 1.3.6.1.4.1.248.11.120.1.2.10.1.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: Type of local peer identifier in 'hm2VpnConnIkeAuthLocId': o default: If 'hm2VpnConnIkeAuthType' is 'psk' then use the IP address or host name from 'hm2VpnConnIkeLocalAddr' as local identifier. In case of 'individualx509' or 'pkcs12' use the DN from local certificate in 'hm2VpnConnIkeAuthCertLocal'. o address: use the IP address or DNS name from 'hm2VpnConnIkeLocalAddr' as local identifier. o id: use the configured value in hm2VpnConnIkeAuthLocId (it can be of any type in the description).
For further information see RFC 2407, section 4.6.2
What is hm2VpnConnIkeAuthLocType?
Controls how this device identifies itself to the remote peer during IKE negotiation: default derives the identity from the local address or local certificate depending on auth type, address always uses hm2VpnConnIkeLocalAddr, and id uses the explicit value configured in hm2VpnConnIkeAuthLocId.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HM2-TC-MIB |
| 1.3.6.1.4.1.248.11 | hm2ConfigurationMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.11.120 | hm2VpnMib | HM2-VPN-MIB |
| 1.3.6.1.4.1.248.11.120.1 | hm2VpnMibObjects | HM2-VPN-MIB |
| 1.3.6.1.4.1.248.11.120.1.2 | hm2VpnConnectionGroup | HM2-VPN-MIB |
| 1.3.6.1.4.1.248.11.120.1.2.10 | hm2VpnConnTable | HM2-VPN-MIB |
| 1.3.6.1.4.1.248.11.120.1.2.10.1 | hm2VpnConnEntry | HM2-VPN-MIB |
| 1.3.6.1.4.1.248.11.120.1.2.10.1.17 | hm2VpnConnIkeAuthLocType | HM2-VPN-MIB |