All MIBs › HM2-PLATFORM-QOS-COS-MIB › hm2AgentCosQueueMgmtWredMinThreshold
hm2AgentCosQueueMgmtWredMinThreshold
Module: HM2-PLATFORM-QOS-COS-MIB
OID (symbolic): HM2-PLATFORM-QOS-COS-MIB::hm2AgentCosQueueMgmtWredMinThreshold
OID (numeric): 1.3.6.1.4.1.248.12.3.3.2.5.1.3
Node type: OBJECT-TYPE
Type: Sixteenths
Access: read-write
Description: Weighted RED minimum queue threshold, below which no packets are dropped for the current drop precedence level. The value specifies the threshold based on a fraction of the overall device queue size in terms of sixteenths (0/16, 1/16, 2/16, ... 16/16). Since device implementations vary, the actual value deployed may be rounded up or down accordingly.
The default value is calculated from the hm2AgentCosQueueIndex and hm2AgentCosQueueDropPrecIndex as shown in the following table (values listed for drop precedence levels 1, 2, and 3, respectively): Queue Index 0: 8, 6, 4 Queue Index 1: 9, 7, 5 Queue Index 2: 10, 8, 6 Queue Index 3: 11, 9, 7 Queue Index 4: 12, 10, 8 Queue Index 5: 13, 11, 9 Queue Index 6: 14, 12, 10 Queue Index 7: 15, 13, 11
This object is only used when hm2AgentCosQueueMgmtType is set to wred(2). Any value set for this object must be equal to or less than the value of hm2AgentCosQueueMgmtWredMaxThreshold.
What is hm2AgentCosQueueMgmtWredMinThreshold?
Obsolete WRED minimum threshold, expressed in sixteenths of the overall queue size, below which no packets at this drop precedence level are dropped; must not exceed the paired WRED max threshold, and only applies when hm2AgentCosQueueMgmtType is wred. It has been superseded by the percentage-based hm2AgentCosQueueMgmtPercentWredMinThreshold object.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.12.3.3.2.5.1.3 snmpwalk -v2c -c public <target> HM2-PLATFORM-QOS-COS-MIB::hm2AgentCosQueueMgmtWredMinThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.12.3.3.2.5.1.3.1 snmpget -v2c -c public <target> HM2-PLATFORM-QOS-COS-MIB::hm2AgentCosQueueMgmtWredMinThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.12.3.3.2.5.1.3.1 s <value>
Start monitoring Hirschmann HiOS Platform2 industrial switch (802.1p CoS queue mapping) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HM2-PLATFORM-QOS-COS-MIB::hm2AgentCosQueueMgmtWredMinThreshold OID value, configure state conditions and alerts, and monitor any Hirschmann HiOS Platform2 industrial switch (802.1p CoS queue mapping) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.12 | hm2PlatformMibs | HM2-TC-MIB |
| 1.3.6.1.4.1.248.12.3 | hm2PlatformQoS | HM2-PLATFORM-QOS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.12.3.3 | hm2PlatformQosCos | HM2-PLATFORM-QOS-COS-MIB |
| 1.3.6.1.4.1.248.12.3.3.2 | hm2AgentCosQueueCfgGroup | HM2-PLATFORM-QOS-COS-MIB |
| 1.3.6.1.4.1.248.12.3.3.2.5 | hm2AgentCosQueueMgmtTable | HM2-PLATFORM-QOS-COS-MIB |
| 1.3.6.1.4.1.248.12.3.3.2.5.1 | hm2AgentCosQueueMgmtEntry | HM2-PLATFORM-QOS-COS-MIB |
| 1.3.6.1.4.1.248.12.3.3.2.5.1.3 | hm2AgentCosQueueMgmtWredMinThreshold | HM2-PLATFORM-QOS-COS-MIB |