All MIBs › HM2-PLATFORM-QOS-COS-MIB › hm2AgentCosQueueMaxBandwidth
hm2AgentCosQueueMaxBandwidth
Module: HM2-PLATFORM-QOS-COS-MIB
OID (symbolic): HM2-PLATFORM-QOS-COS-MIB::hm2AgentCosQueueMaxBandwidth
OID (numeric): 1.3.6.1.4.1.248.12.3.3.2.4.1.4
Node type: OBJECT-TYPE
Type: Percent
Access: read-write
Description: Maximum bandwidth allowed for this queue, typically used to shape the outbound transmission rate. The value is specified in terms of percentage of overall link speed for the port in 1% increments. A value of 0 means there is no maximum bandwidth limit in effect and that the queue is allowed to use any available excess bandwidth (i.e., work conserving method). The default value is 0.
When set to a non-zero value, the queue is restricted to using at most the bandwidth specified in this object for the outbound transmission rate (i.e., non-work-conserving method). Any non-zero value set for this object must be equal to or greater than the value of hm2AgentCosQueueMinBandwidth for the same hm2AgentCosQueueIndex on this interface.
What is hm2AgentCosQueueMaxBandwidth?
The maximum bandwidth this queue may use, as a percentage of link speed; 0 (default) means no cap and the queue may use any available excess bandwidth. A non-zero value must be at least as large as the queue's configured hm2AgentCosQueueMinBandwidth.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.12.3.3.2.4.1.4 snmpwalk -v2c -c public <target> HM2-PLATFORM-QOS-COS-MIB::hm2AgentCosQueueMaxBandwidth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.12.3.3.2.4.1.4.1 snmpget -v2c -c public <target> HM2-PLATFORM-QOS-COS-MIB::hm2AgentCosQueueMaxBandwidth.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.12.3.3.2.4.1.4.1 s <value>
Start monitoring Hirschmann HiOS Platform2 industrial switch (802.1p CoS queue mapping) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HM2-PLATFORM-QOS-COS-MIB::hm2AgentCosQueueMaxBandwidth OID value, configure state conditions and alerts, and monitor any Hirschmann HiOS Platform2 industrial switch (802.1p CoS queue mapping) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.12 | hm2PlatformMibs | HM2-TC-MIB |
| 1.3.6.1.4.1.248.12.3 | hm2PlatformQoS | HM2-PLATFORM-QOS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.12.3.3 | hm2PlatformQosCos | HM2-PLATFORM-QOS-COS-MIB |
| 1.3.6.1.4.1.248.12.3.3.2 | hm2AgentCosQueueCfgGroup | HM2-PLATFORM-QOS-COS-MIB |
| 1.3.6.1.4.1.248.12.3.3.2.4 | hm2AgentCosQueueTable | HM2-PLATFORM-QOS-COS-MIB |
| 1.3.6.1.4.1.248.12.3.3.2.4.1 | hm2AgentCosQueueEntry | HM2-PLATFORM-QOS-COS-MIB |
| 1.3.6.1.4.1.248.12.3.3.2.4.1.4 | hm2AgentCosQueueMaxBandwidth | HM2-PLATFORM-QOS-COS-MIB |