All MIBs › HM2-PLATFORM-DOT1X-ADVANCED-MIB › hm2AgentDot1xPortControlMode
hm2AgentDot1xPortControlMode
Module: HM2-PLATFORM-DOT1X-ADVANCED-MIB
OID (symbolic): HM2-PLATFORM-DOT1X-ADVANCED-MIB::hm2AgentDot1xPortControlMode
OID (numeric): 1.3.6.1.4.1.248.12.36.2.1.1.1
Node type: OBJECT-TYPE
Type: Dot1xPortControlMode
Access: read-write
Description: Dot1x port control mode of this port.The Port control mode . The port control mode for this interface can take the following values , force-unauthorized - the port is in unauthorized mode, auto-Port based mode. If a client authenticates suscessfully, then the interface is authorized . Otherwise, the port is in unauthorized mode. If more than one clients are attached to the port , then only one client needs to authenticate to allow other clients access. force-authorized - The port is placed in authorized mode multiClient - If more than one client is attached to the port, then each client needs to authenticate separately. This object depcreates dot1xAuthAuthControlledPortControl object in IEEE8021-PAE-MIB
What is hm2AgentDot1xPortControlMode?
Sets the port's 802.1x control mode: forceUnauthorized keeps the port blocked, forceAuthorized always allows traffic, auto requires a single successful client authentication to open the port for all attached clients, and multiClient requires every client on the port to authenticate separately.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.248.12.36.2.1.1.1 snmpwalk -v2c -c public <target> HM2-PLATFORM-DOT1X-ADVANCED-MIB::hm2AgentDot1xPortControlMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.248.12.36.2.1.1.1.1 snmpget -v2c -c public <target> HM2-PLATFORM-DOT1X-ADVANCED-MIB::hm2AgentDot1xPortControlMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.248.12.36.2.1.1.1.1 s <value>
Start monitoring Hirschmann HiOS/Platform2 industrial switch (advanced 802.1X) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HM2-PLATFORM-DOT1X-ADVANCED-MIB::hm2AgentDot1xPortControlMode OID value, configure state conditions and alerts, and monitor any Hirschmann HiOS/Platform2 industrial switch (advanced 802.1X) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.248 | hirschmann | HIRSCHMANN-GENERIC-ERROR-MIB |
| 1.3.6.1.4.1.248.12 | hm2PlatformMibs | HM2-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.248.12.36 | hm2PlatformDot1xAdvanced | HM2-PLATFORM-DOT1X-ADVANCED-MIB |
| 1.3.6.1.4.1.248.12.36.2 | hm2AgentDot1xPortConfigGroup | HM2-PLATFORM-DOT1X-ADVANCED-MIB |
| 1.3.6.1.4.1.248.12.36.2.1 | hm2AgentDot1xPortConfigTable | HM2-PLATFORM-DOT1X-ADVANCED-MIB |
| 1.3.6.1.4.1.248.12.36.2.1.1 | hm2AgentDot1xPortConfigEntry | HM2-PLATFORM-DOT1X-ADVANCED-MIB |
| 1.3.6.1.4.1.248.12.36.2.1.1.1 | hm2AgentDot1xPortControlMode | HM2-PLATFORM-DOT1X-ADVANCED-MIB |